24 - User's Manual
Initial Confi guration - via a Local Console
4
Follow the onscreen messages to complete the initial confi guration:
A local console requires the following:
1. A monitor is connected via an HDMI or VGA cable.
2. A mouse and/or a keyboard are connected to the system.
3. It is presumed that the system has not been confi gured yet.
You should create a password for the protection of your system fi rst. Use the combination of
alphabetic, numeric, and special characters of at least 8 characters to create a password of
reasonable strength.
1. Select the UI language, Time zone, and current date and time. Click on the Continue button to
proceed. Make sure you enter the correct date and time.
To Next Page
Loading...
Need help?
General
