04
that you have plugged in your tracker the correct way round,
and that the gold coloured charging strips on your tracker are
facing the 4 contacts inside the USB socket.
Your tracker will take around 1 hour to fully charge, after
which time the red light will go out to indicate that it’s fully
charged. A full charge will last around 5-7 days.
You can charge your fitness tracker using a USB socket on
any computer, phone/tablet charger or power bank.
4. Set Up Your Activity Tracker using VeryFitPro
On your phone/tablet, ensure that Bluetooth is turned on
(Settings > Bluetooth) and open the VeryFitPro app that you
installed earlier.
1. When prompted, allow VeryFitPro to send notifications and
access to Apple Health/Google Fit if desired.
2. On the next page, keep swiping left until you get to the ‘Add
Device’ page.
3. Tap ID115Plus HR in the device list, wait a few moments
for a tick to appear and tap ‘Confirm Device’. Your activity
tracker will vibrate briefly to confirm which device you are
pairing.
4. When the Bluetooth Pairing Request pop-up appears, tap
‘Pair’ to complete the pairing process.
5. Enter your personal stats and set goals for steps and sleep
to finish the set up process.
If the VeryFitPro app fails to find your tracker, restart your
phone/tablet and check that Bluetooth is turned on. Plug your
tracker into a USB socket, open VeryFitPro and tap ‘Refresh’ to
refresh the device list on the ‘Add Device’ page.
To Next Page
Loading...