Denon AVC-A1XVA - Setting the Crossover Frequency Individually for the Different Channels

56
2 Setting the crossover frequency individually for the different channels
1
Select “Advanced” at the Crossover Frequency
screen.
Advanced
*Crossover Freq
2
Select the speaker to be set.
Front : 80Hz
*Crossover Freq
3
Select the frequency.
Front : 100Hz
*Crossover Freq
NOTES:
• If “LFE–THX–” is selected at “2-2. Subwoofer Setup”, the frequencies can only be selected
for speakers set to “Small” at “2-1. Speaker Configuration”.
• If “LFE+Main” is set at “2-2. Subwoofer Setup”, the frequencies can be selected regardless of the speaker size setting.
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)
(Main unit) (Remote control unit)