EasyManuals Logo

Denon AVR-1312 Getting Started

Denon AVR-1312
81 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #22 background imageLoading...
Page #22 background image
7
Connecting a Blu-ray Disc player/DVD player
•You can enjoy video and audio from a Blu-ray Disc or DVD.
•Select the connector to use and connect the device.
•For instructions on HDMI connections, see “Connecting an HDMI-compatible device” (vpage5).
Cables used for connections
Video cable (sold separately)
Video cable
Audio cables (sold separately)
Audio cable
R
L
R
L
R
L
R
L
VIDEO
AUDIO
AUDIO
RL
OUT
OUT
VIDEO
Blu-ray Disc player /
DVD player
Set this to change the digital input connector to which the input source is assigned.
“Input Assign” (vpage31)
in Set as Necessary
When you want to play back HD Audio (Dolby TrueHD, DTS-HD, Dolby Digital Plus, DTS Express) and Multi-
channel PCM with this unit, use an HDMI connection (vpage 5 “Connecting an HDMI-compatible
device”).
Connecting a TV
•Select the connector to use and connect the device.
•For instructions on HDMI connections, see “Connecting an HDMI-compatible device” (vpage5).
To listen to TV audio through this device, use the optical digital connection.
NOTE
If the VIDEO input connector and S-VIDEO input connector are to be used, be sure to connect the
MONITOR output connector of the unit and the VIDEO input connector of the TV, using a video cable.
Cables used for connections
Video cable (sold separately)
Video cable
Audio cable (sold separately)
Optical cable
IN
VIDEO
AUDIO
OPTICAL
OUT
VIDEO
TV
Set this to change the digital input connector to which the input source is assigned.
“Input Assign” (vpage31)
in Set as Necessary
Basic version
Advanced version
Information
Basic version

Table of Contents

Other manuals for Denon AVR-1312

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-1312 and is the answer not in the manual?

Denon AVR-1312 Specifications

General IconGeneral
Number of Channels5.1
HDMI Inputs4
HDMI Outputs1
Amplification TypeDiscrete
Input Sensitivity200 mV
Frequency Response10 Hz - 100 kHz (+1, -3 dB)
Signal-To-Noise Ratio98 dB
Digital Optical Inputs2
Coaxial Digital Input1
Analog Audio Inputs4
Headphone JackYes
Tuner Presets56
Dimensions (W x H x D)434 x 151 x 319 mm
Amplifier TypeDiscrete
Tuner TypeAM/FM
Preset Stations56
Remote ControlYes
Dolby TechnologiesDolby Digital Plus, Dolby Pro Logic II, Dolby TrueHD
DTS TechnologiesDTS-HD Master Audio
Output Power / Channel75 W (8 Ohms, 20 Hz - 20 kHz, 2 channels driven, THD 0.08%)
Input Impedance47 kOhms
Audio Inputs2 Optical, 1 Coaxial, 4 Analog
Power Output75W per channel (8 ohms, 20Hz-20kHz, 0.08% THD)

Related product manuals