To Next PageTo Next PageWhy are the instruments reversed during stereo playback on my Denon Stereo Receiver?
If the instrument positions are reversed during stereo playback on your Denon Stereo Receiver, it's likely due to reversed connections of the left and right speakers or the left and right input/output cables. Double-check the left and right connections to ensure they are correct.
Power Amplifier Section| front power output (8 ohms) | 85 W + 85 W |
|---|---|
| front power output (6 ohms) | 120 W + 120 W |
| center power output (8 ohms) | 85 W |
| center power output (6 ohms) | 120 W |
| surround power output (8 ohms) | 85 W + 85 W |
| surround power output (6 ohms) | 120 W + 120 W |
| surround back power output (8 ohms) | 85 W + 85 W |
| surround back power output (6 ohms) | 120 W + 120 W |
Preamplifier Section| input sensitivity/impedance | 200 mV/47 kohms |
|---|---|
| output level/load impedance | SUBWOOFER 1.2 V/10 kohms |
| frequency response | 10 Hz - 100 kHz (+1, -3 dB) |
| signal-to-noise ratio | 98 dB (IHF-A weighted) |
| tone control treble | ±12 dB at 10 kHz |
| tone control bass | ±12 dB at 100 Hz |
FM Section| tuning frequency range (FM) | 87.5 - 107.9 MHz |
|---|---|
| usable sensitivity (FM) | 1.0 µV (11.2 dBf) |
AM Section| tuning frequency range (AM) | 520 - 1710 kHz |
|---|---|
| usable sensitivity (AM) | 18 µV |
General| power supply | AC 120 V, 60 Hz |
|---|---|
| power consumption | 5.1 A |
| dimensions | 434 (W) x 147 (H) x 417 (D) mm |
| weight | 11.7 kg |
Details the procedure for checking leakage current.
Warns about the risk of electric shock during servicing.
Outlines necessary safety checks after service completion.
Details the process for initializing the AV receiver after component replacement.
Describes the procedure for adjusting the idling current in the audio section.
Details adjustment of component video signal levels.
