L
Lisa ThompsonSep 10, 2025
What does “Enter Lock Code [ ]” mean on my Denon AVR-1910?
- AakimSep 10, 2025
If your Denon Receiver displays “Enter Lock Code [ ]”, it means the selected channels are locked. Insert the four-digit password into “[ ]”.
To Next PageTo Next PageWhat does “Enter Lock Code [ ]” mean on my Denon AVR-1910?
If your Denon Receiver displays “Enter Lock Code [ ]”, it means the selected channels are locked. Insert the four-digit password into “[ ]”.
Why is there no sound coming from the subwoofer connected to my Denon AVR-1910 Receiver?
If your subwoofer isn't producing sound with your Denon Receiver, check these items: First, make sure the subwoofer is powered on. Then, verify that the “Subwoofer” setting in “Speaker Config.” is set to “Yes”. Ensure the subwoofer is properly connected to the receiver. Finally, check the subwoofer's volume level and adjust it to an appropriate setting.
How do I get HDMI audio to output from speakers on my Denon Receiver?
If HDMI audio signals are not being output from the speakers connected to your Denon Receiver, check the “Manual Setup” – “HDMI Setup” – “HDMI Audio Out” setting. If it is set to “TV”, change it to “AMP”.
How to get sound from monitor connected with HDMI connections on Denon AVR-1910 Receiver?
If no sound is output from the monitor connected via HDMI to your Denon Receiver, check the “Manual Setup” – “HDMI Setup” – “HDMI Audio Out” setting. If this setting is set to “AMP”, change it to “TV”.
Why is Dolby TrueHD, DTS-HD, or Dolby Digital Plus audio not outputting on my Denon AVR-1910?
If you're not getting Dolby TrueHD, DTS-HD, or Dolby Digital Plus audio on your Denon Receiver, it could be due to a few reasons: Ensure the HDMI is properly connected. Check that the Blu-ray Disc player’s audio output setting is set to bitstream. Also, verify that your Blu-ray Disc player is compatible with DTS sound playback. Consult your Blu-ray Disc player’s instructions for setting adjustments.
What does “ACQUIRING SIGNAL” mean on my Denon AVR-1910 Receiver?
If your Denon Receiver displays “ACQUIRING SIGNAL”, it means the signal cannot be received or is displayed while the SiriusConnect Home Tuner is connecting. Try repositioning your SiriusConnect Home Tuner and Home Dock antenna.
Why can't I record a picture using my Denon AVR-1910 Receiver?
If you cannot record a picture, it may be because the input source does not match the recorder’s video connection connector (video). The video conversion function does not work for the REC OUT connectors, so match the input source and recorder connections.
Why doesn't the “DOLBY DIGITAL” indicator appear on the display of my Denon Receiver?
If the “DOLBY DIGITAL” indicator isn't showing on your Denon Receiver's display, the Blu-ray Disc player / DVD player’s digital audio output setting might not be correct. Check the Blu-ray Disc player / DVD player’s audio output setting. Refer to the Blu-ray Disc player / DVD player’s operating instructions for details.
Why are the surround speakers not working on my Denon Stereo Receiver?
If you're not getting any sound from the surround speakers on your Denon Stereo Receiver, it might be because the surround mode is set to “STEREO”, “DIRECT” or “PURE DIRECT”. To resolve this, set the receiver to a surround playback mode.
How to fix no sound from my Denon Stereo Receiver speakers?
If no sound is coming from the speakers of your Denon Stereo Receiver, check the following: * Ensure the connections to the input devices and speaker cables are correct. * Verify that the selected input source matches the device you are trying to play. * Increase the master volume to an audible level. * Deactivate mute mode. * Disconnect any connected headphones. * Confirm digital signals are being input, and the input mode is correctly set.
General| Speakers connectivity type | - |
|---|---|
| Receiver type | Surround |
| Frequency range | 10 - 100000 Hz |
| Audio output channels | 7.1 channels |
| Signal-to-Noise Ratio (SNR) | 100 dB |
| Total Harmonic Distortion (THD) | 0.08 % |
| Power output per channel (1KHz@6 Ohm) | 125 W |
| Power output per channel (20-20KHz@8 Ohm) | 90 W |
| Equalizer | Yes |
| Product color | Black |
| Audio decoders | DTS-HD Master Audio, Dolby Pro Logic IIz, Dolby TrueHD |
| Apple docking compatibility | iPod |
| Optical drive included | No |
| AM band range | 520 - 1710 kHz |
| FM band range | 87.5 - 107.9 MHz |
| Supported radio bands | AM, FM |
| AC input voltage | 120 V |
| AC input frequency | 60 Hz |
| Power consumption (standby) | 0.3 W |
| HDMI in | 4 |
| S-Video inputs quantity | 1 |
| Component video (YPbPr/YCbCr) in | 2 |
Weight and Dimensions| Depth | 171 mm |
|---|---|
| Width | 434 mm |
| Height | 377 mm |
| Weight | 10700 g |
