28
AVR-1910/1620/1610/790/590
Check the TV
Is the TV HDCP-compatible?
NO
Use an HDCP-compatible TV.
PC TVs cannot be used.
YES
Is the TV compatible with resolutions of 1080P?
NO
If the TV is not compatible with
resolutions of 1080P, no picture
will be output, even if the DVD
player's resolution is set to
1080P.
YES
Is the TV's input set to HDMI?
NO
Check the TV's input setting,
referring to the TV's operating
instructions.
YES
Are the picture and sound output when a different TV is used?
NO
The TV is defective.
YES
Check the set (AVR-4310CI)
Is the set's input set to HDMI?
NO
Check the set's input setting,
referring to the set's operating
instructions.
YES YES
The set does not recognize the TV.
Is the TV information properly displayed on the "Monitor info." display
menu?
Is IC5 pin 3 "H" (3V-5V)? With the TV connected, check the voltage of
the IC on the side on which the TV is connected.
NO
The pattern and circuit from
the HDMI connector (JACK5)
to the IC (IC5) is defective, or
the HDMI output circuitry is
defective.
(IC5/IC31 and surrounding
circuitry)
YES
When using a DENON DVD
player, is the fluorescent
display tube's "HDMI" indicator
lit?
If using a non-DENON DVD
player, proceed to "NO".
NO
The DVD player does not
recognize the connection
with the set.
Is the HDMI connector (JACK1/
JACK2/JACK3/JACK4) pin 19
"H" (5V)? With the DVD player
connected, check the voltage
of the HDMI connector for the
input on the side on which the
DVD player is connected.
NO
The pattern and circuit from
the HDMI connector (JACK1/
JACK2/JACK3/JACK4) to the
IC1045 is defective.
YES YES
The HDMI output circuitry is defective.
(IC1/IC31/IC5 and surrounding circuitry)
To Next Page
Loading...
Need help?
General
Weight and Dimensions
