Denon AVR-1911 User Manual

73
ENGLISH
Basic version Advanced versionSimple version Information
Surround
Surround mode (vpage28)
Surround Parameter (vpage49)
Tone
z15
(vpage51)
Audyssey Settings
z20
(vpage51)
RESTORER
z19
(vpage53)
AFDM
z12
(vpage50)
S.Back
(vpage50)
Front Height
z13
(vpage50)
Height Gain
(vpage51)
Subwoofer
(vpage51)
PRO LOGIC g/gx Music mode only
NEO:6 Music
mode only
Panorama
(vpage50)
Dimension
(vpage50)
Center Width
(vpage50)
Center Image
(vpage49)
MultEQ
®
(vpage51)
Dynamic EQ
®
z17
(vpage52)
Dynamic
Volume™
z18
(vpage52)
PURE DIRECT
S
z3
DIRECT (2 channel)
S
z3
DIRECT (Multi-channel)
STEREO
S S S S S
MULTI CH IN
S S S S
z14
S S S S
DOLBY PRO LOGIC gz S S S S S S S
DOLBY PRO LOGIC gx S S S S S S S S S
DOLBY PRO LOGIC g S S S S S S S S S S
DTS NEO:6
S S S S S S S
DOLBY DIGITAL
S S S S
z14
S S S S
DOLBY DIGITAL Plus
S S S S
z14
S S S S
DOLBY TrueHD
S S S S
z14
S S S S
DTS SURROUND
S S S S
z14
S S S S
DTS 96/24
S S S S
z14
S S S S
DTS-HD
S S S S
z14
S S S S
DTS Express
S S S S
z14
S S S S
MULTI CH STEREO
S S S S S S S
ROCK ARENA
S S S
z16
S S S S
JAZZ CLUB
S S S S S S S
MONO MOVIE
S S S S S S S
VIDEO GAME
S S S S S S S
MATRIX
S S S S S S S
VIRTUAL
S S S S S
z3 Only when “Subwoofer Mode” is set to “LFE+Main” (vpage55), sound is output from the subwoofer.
z12 This item can be selected when a Dolby Digital or DTS or DVD-Audio signal is played.
z13 If “Speaker Config.” – “Front Height” (vpage55) is set to “None”, this item cannot be selected.
z14 This item can be selected when “Surround Parameter” – “Front Height” (vpage50) is set to “ON”.
z15 This item cannot be set when “Dynamic EQ” (vpage52) is set to “ON”.
z16 In this surround mode, bass is +6 dB, and treble is +4 dB. (Default)
z17 This item cannot be set when “MultEQ” (vpage51) is set to “OFF” or “Manual”.
z18 This item cannot be set when “Dynamic EQ” (vpage52) is set to “OFF”.
z19 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z20 For HD Audio whose sampling frequency of an input signal is more than 96 kHz, this sound parameter cannot be set.

Denon AVR-1911 Specifications

General

Frequency range	10 - 100000 Hz
Audio output channels	7.1 channels
Audio A/D Converter (ADC)	24-bit/96kHz
Signal-to-Noise Ratio (SNR)	100 dB
Total Harmonic Distortion (THD)	0.8 %
HDMI	Yes
Audio system	Dolby TrueHD, Dolby Digital Plus, Dolby Digital EX, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, DTS-HD, DTS 96/24
Output power	125 W
Dimensions (WxDxH)	434 x 381 x 171 mm
Power requirements	AC 230, 50 Hz
HDMI ports quantity	5
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
I/O ports	1 x Component in 1 x Composite Monitor out 1 x USB 1 x Microphone 1 x FM Tuner Antenna 1 x AM Tuner Antenna
Connectivity technology	Wired
Headphone outputs	7
Digital audio optical in	1
Product color	Black
Power consumption (standby)	0.1 W
Power consumption (typical)	460 W

Weight and Dimensions

Weight	10200 g