1
Press the power ON/SOURCE button and the OFF button at
the same time.
• The LEARNED/TX indicator flashes.
2
Press the 1 (play) button.
• TV and DBS/CABLE mode buttons and TEARNED/TX
indicator flash.
3
Press the mode button of the equipment (TV or DBS/CABLE)
that is to be reset.
• The CD, CDR/MD, TAPE, DVD/VDP, and VCR mode buttons
and TEARNED/TX indicator will flash.
4
Press the mode button of the equipment that is to be reset
again.
• During the resetting operation, the selected mode button
and the LEARNED/TX indicator will light; they will return to
steady state upon completion.
To Next Page
Loading...
