Denon AVR-983 User Manual

52
DTS NEO:6 mode
1
Select the DTS NEO:6 mode.
2
Play a program source.
(Main unit) (Remote control unit)
1 3, 5 1, 4, 6
1
3
4, 5, 6
SELECT
The DTS NEO:6 Cinema or
Music mode can be chosen
directly by pressing the
CINEMA or MUSIC button on
the remote control unit
during playback in the DTS
NEO:6 mode.
• Surround playback can be performed for the analog input and PCM digital input 2-channel signals.
3
Set the surround parameter mode.
(Main unit)
(Remote control unit)
4
Select the play mode.
SELECT
(Main unit)
(Remote control unit)
MODE cinema MODE music
Display
This is the screen when operated with the remote
control unit.
This is the screen when operated with the remote
control unit.
5
Select the various parameters. (See “Surround parameters
e” on page 59 for a description of the various parameters.)
(Main unit) (Remote control unit)
NOTE:
• When “Default” is selected and the 0 cursor button is pressed, “MODE” and “TONE” are automatically reset to the default values and
“CINEMA EQ” is set to “OFF”.
6
Set the various surround parameters.
SELECT
(Main unit) (Remote control unit)
7
When the surround parameters are set using the buttons on
the main unit, stop operating buttons after completing the
settings. The settings are automatically finalized and the
normal display reappears after several seconds.
When the settings are made using the buttons on the remote
control unit, press the SURROUND PARAMETER button to
finish.

Denon AVR-983 Specifications

General

Brand	Denon
Model	AVR-983
Category	Stereo Receiver
Language	English