Denon AVR-E300 User Manual

43
Listening to FM/AM broadcasts
Cancelling preset skip
1
While the Preset Skip screen is displayed, use o p
to select a group containing a broadcast station to
cancel the skip for.
2
Use ui to select a broadcast station to cancel the
skip for.
GTV ScreenH
CH 3 FM 92.50MHz
CH 2 FM 92.30MHz
CH 1 FM 92.10MHz
Preset Group
Set No. 1-8 to skip
CH 6 FM 93.50MHz
CH 5 FM 93.10MHz
CH 8 FM 94.10MHz
CH 7 FM 93.70MHz
CH 4 FM 92.70MHz
On
On
On
On
On
On
On
Preset Skip
1-8
On
GDisplay of this unitH
1 92.10M:•On –
3
Use o p to select “On”.
The skip is cancelled.
NOTE
You cannot cancel the skip for each group.
n Tuner operation buttons
Operation buttons Function
CHANNEL +, – Preset channel selection
INFO
Display of information such as the
source name, volume, and sound mode
name
OPTION
FM/AM switching
Direct frequency tuning /
Preset Memory /
Switch tuning modes /
Auto Preset /
Preset Name /
Preset Skip /
Video Select
uio p Cursor operation
ENTER Enter
BACK Return
SETUP Setup menu
FAVORITE
STATION 1 – 3
Call up favorite stations
FAVORITE
STATION 1 – 3
(Press and hold)
Add to the favorite stations
TUNE +, – Tuning (up/down)
Basic instructions
Advanced instructions
Information
Basic instructions
DVD

Denon AVR-E300 Specifications

General

Channels	5.1
HDMI Inputs	4
HDMI Outputs	1
3D Pass-through	Yes
Audio Return Channel (ARC)	Yes
Dolby TrueHD	Yes
DTS-HD Master Audio	Yes
Networking	No
AirPlay	No
Audyssey MultEQ	Yes
HDMI Pass-Through	Yes
Receiver Type	AV Receiver
HDMI Ports Quantity	5
Audio DAC	192 kHz / 24-bit
Digital Sound Processor (DSP)	Yes
Input Sensitivity	200 mV
Response Bandwidth	10 Hz - 100 kHz
Signal-To-Noise Ratio	98 dB
Tuner Bands	AM/FM
Amplifier Type	Discrete
Frequency Response	10 Hz - 100 kHz
Bluetooth	No
Wi-Fi	No
Output Power / Total	375 W
Input Impedance	47 kOhms
Video Inputs/Outputs	Composite
Audio Inputs/Outputs	Digital Optical
Power Output per Channel	75 W (8 ohms, 20 Hz - 20 kHz, 0.08% THD)
Power Output	75W (8 ohms, 20 Hz - 20 kHz, 0.08% THD, 2 channels driven)