EasyManuals Logo

Denon AVR-E300 User Manual

Denon AVR-E300
138 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #16 background imageLoading...
Page #16 background image
13
Connecting a TV
•This section describes how to connect when your TV does not support ARC (Audio Return Channel).
For instructions on HDMI connections, see “Connecting this unit to a TV via HDMI connections”
(vpage9).
•To listen to TV audio through this unit, use the optical digital connection.
VIDEOAUDIO
IN
VIDEO
OPTICAL
OUT
a a
TV
NOTE
The menu screen is only displayed on TV connected to this unit via HDMI. If your TV is connected
to this unit via other video output connectors, perform menu operations while seeing the display
on this unit.
Connecting other devices
n Audio connection
The following methods are available for connecting to this unit.
a DIGITAL AUDIO OPTICAL connector
When a multichannel audio (digital bit stream audio) is input, this unit decodes the audio to play
back surround sound.
n Video connection
The following methods are available for connecting to this unit.
a VIDEO OUT (MONITOR) connector
This makes an analog video connection.
The sections in the connection diagram are also available for connections. To connect devices
to these connectors, you must set up input connectors. For details, see “Input Assign” (vpage95).
Basic instructions
Advanced instructions
Information
Basic instructions
DVD

Table of Contents

Other manuals for Denon AVR-E300

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Denon AVR-E300 and is the answer not in the manual?

Denon AVR-E300 Specifications

General IconGeneral
Channels5.1
HDMI Inputs4
HDMI Outputs1
3D Pass-throughYes
Audio Return Channel (ARC)Yes
Dolby TrueHDYes
DTS-HD Master AudioYes
NetworkingNo
AirPlayNo
Audyssey MultEQYes
HDMI Pass-ThroughYes
Receiver TypeAV Receiver
HDMI Ports Quantity5
Audio DAC192 kHz / 24-bit
Digital Sound Processor (DSP)Yes
Input Sensitivity200 mV
Response Bandwidth10 Hz - 100 kHz
Signal-To-Noise Ratio98 dB
Tuner BandsAM/FM
Amplifier TypeDiscrete
Frequency Response10 Hz - 100 kHz
BluetoothNo
Wi-FiNo
Output Power / Total375 W
Input Impedance47 kOhms
Video Inputs/OutputsComposite
Audio Inputs/OutputsDigital Optical
Power Output per Channel75 W (8 ohms, 20 Hz - 20 kHz, 0.08% THD)
Power Output75W (8 ohms, 20 Hz - 20 kHz, 0.08% THD, 2 channels driven)

Related product manuals