Denon AVR-E300 User Manual

66
Convenient functions
4
If you selected “On” in step 3, press i and select
“Source”.
5
Press o p to select the input source for video you
want to play back, and press ENTER.
Playback starts.
NOTE
Input sources for which “Hide” is selected at “Hide Sources”
(vpage97) cannot be selected.
Displaying your desired video on the
monitor during audio playback (Video
Select)
This unit can display video from a dierent source on TV during audio
playback.
You can set this for each input source.
USB
TUNER NETWORK
1
Press OPTION during audio playback.
The option menu screen is displayed.
2
Use ui to select “Video Select”, then press ENTER.
OPTION
Internet Radio
Title
Now Playing
Artist
Album
00:06 100%
Back
MP3 128kbps
Option
Save to Favorite
Option
Slideshow
Video Select
3
Use o p to select the Video Select mode.
•Each time o p is pressed, the setting is changed as shown below.
Off On
O
Disable Video Select mode.
On
Enable Video Select mode.
Basic instructions
Advanced instructions
Information
Basic instructions
DVD

Denon AVR-E300 Specifications

General

Channels	5.1
HDMI Inputs	4
HDMI Outputs	1
3D Pass-through	Yes
Audio Return Channel (ARC)	Yes
Dolby TrueHD	Yes
DTS-HD Master Audio	Yes
Networking	No
AirPlay	No
Audyssey MultEQ	Yes
HDMI Pass-Through	Yes
Receiver Type	AV Receiver
HDMI Ports Quantity	5
Audio DAC	192 kHz / 24-bit
Digital Sound Processor (DSP)	Yes
Input Sensitivity	200 mV
Response Bandwidth	10 Hz - 100 kHz
Signal-To-Noise Ratio	98 dB
Tuner Bands	AM/FM
Amplifier Type	Discrete
Frequency Response	10 Hz - 100 kHz
Bluetooth	No
Wi-Fi	No
Output Power / Total	375 W
Input Impedance	47 kOhms
Video Inputs/Outputs	Composite
Audio Inputs/Outputs	Digital Optical
Power Output per Channel	75 W (8 ohms, 20 Hz - 20 kHz, 0.08% THD)
Power Output	75W (8 ohms, 20 Hz - 20 kHz, 0.08% THD, 2 channels driven)