Denon AVR-S910W Service Manual

Error
Code
DPMS Update Error Display Details of Error code Remedies
A1
C o n n e c t i o n F a i l A 1
IP Address acquisition failure
(Time Out).
Check the network connection. Carry
out the update in an environment that
has little network load.
A2
L o g i n f a i l e d A 2
DPMS login incorrect notication.
Check the network connection. Carry
out the update in an environment that
has little network load.
A3
S e r v e r i s b u s y A 3
DPMS congestion notication.
Check the network connection. Carry
out the update in an environment that
has little network load.
A4
C o n n e c t i o n F a i l A 4
DPMS connection failure notica-
tion.
Check the network connection. Carry
out the update in an environment that
has little network load.
A6
U p d a t i n g f a i l A 6
Error notication received while
requesting the Firmware Info.
Turn off and on the power. Updating
starts automatically.
Carry out the update in an environment
that has little network load.
A7
U p d a t i n g f a i l A 7
Time Out while obtaining Firm-
ware information.
Turn off and on the power. Updating
starts automatically.
Carry out the update in an environment
that has little network load.
AE
D o w n l o a d f a i l A E
Error(NG) notication received
while requesting Firmware Down-
load.
Turn off and on the power. Updating
starts automatically.
Carry out the update in an environment
that has little network load.
AF
D o w n l o a d f a i l A F
Error(Server Busy) notication re-
ceived while requesting Firmware
Download.
Turn off and on the power. Updating
starts automatically.
Carry out the update in an environment
that has little network load.
B0
D o w n l o a d f a i l B 0
Error(Connect failure) notication
received while requesting Firm-
ware Download.
Turn off and on the power. Updating
starts automatically.
Carry out the update in an environment
that has little network load.
B1
D o w n l o a d f a i l B 1
Error in Firmware Download (Time
Out).
Turn off and on the power. Updating
starts automatically.
Carry out the update in an environment
that has little network load.
B2
U p d a t i n g f a i l B 2
Error notication received after
rewriting the CY920 Firm.
Turn off and on the power. Updating
starts automatically.
Carry out the update in an environment
that has little network load.
B3
U p d a t i n g f a i l B 3
Error in Firmware Update (Time
Out).
Turn off and on the power. Updating
starts automatically.
Carry out the update in an environment
that has little network load.
B4
U p d a t i n g f a i l B 4
Failed to transit to Boot Loader
Mode.
Initialize the unit and try updating
again.
B5
U p d a t i n g f a i l B 5
Failed to transit to Application
Mode.
Initialize the unit and try updating
again.
74

Denon AVR-S910W Specifications

General

Receiver type	Surround
Audio output channels	7.2 channels
Power output per channel (1KHz@6 Ohm)	185 W
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	8
Composite video in	2
Digital audio coaxial in	1
Wi-Fi	Yes
AM band range	520 - 1710 kHz
FM band range	87.5 - 107.9 MHz
Supported radio bands	AM, FM
Internet radio services supported	Pandora, SIRIUS Internet Radio, Spotify
Optical drive included	No
Display	-
Product color	Black
Audio decoders	Dolby Surround, Dolby TrueHD
AC input voltage	120 V
Power consumption (standby)	0.1 W
Power consumption (typical)	500 W
Audio formats supported	AAC, ALAC, FLAC, MP3, WAV, WMA

Weight and Dimensions

Depth	337.82 mm
Width	434.34 mm
Height	167.64 mm
Weight	9389 g