Denon AVR-S910W Service Manual

SURROUND MODES AND PARAMETERS
Sound modes and channel output
S This indicates the audio output channels or surround parameters that can be set.
D This indicates the audio output channels. The output channels depend on the settings of “Speaker Config.”. (v
p. 196)
Sound mode
Channel output
Front L/R Center Surround L/R
Surround Back
L/R
Front Height
L/R
Top Front L/R Top Middle L/R
Front Dolby
Atmos Enabled
L/R
Surround Dolby
Atmos Enabled
L/R
Subwoofer
Direct/Pure Direct (2-channel)
S Dz4
Direct/Pure Direct (Multi-channel)
SDDDz1 Dz1 Dz1 Dz1 Dz1 Dz1 D
Stereo
S D
Multi Ch In
SDDDz1 Dz3 Dz3 Dz3 Dz3 Dz3 D
Dolby Surround
SDDDz2
DDDDDD
DTS Neural:X
SDDDDDDDDD
Dolby Digital
SDDDDz3 Dz3 Dz3 Dz3 Dz3 D
Dolby Digital Plus
SDDDz1 Dz1 Dz3 Dz3 Dz3 Dz3 D
Dolby TrueHD
SDDDz1 Dz1 Dz3 Dz3 Dz3 Dz3 D
Dolby Atmos
SDDDDDDDDD
DTS Surround
SDDDDz3 Dz3 Dz3 Dz3 Dz3 D
DTS 96/24
SDDDDz3 Dz3 Dz3 Dz3 Dz3 D
DTS-HD
SDDDz1 Dz1 Dz3 Dz3 Dz3 Dz3 D
DTS Express
SDDDDz3 Dz3 Dz3 Dz3 Dz3 D
DTS:X
SDDDDDDDDD
Multi Ch Stereo
SDDDDDDDDD
Rock Arena
SDDDDDDDDD
Jazz Club
SDDDDDDDDD
Mono Movie
SDDDDDDDDD
Video Game
SDDDDDDDDD
Matrix
SDDDDDDDDD
Virtual
S D
z1
A signal for each channel contained in an input signal is output as audio.
z2 Audio is not output when “Speaker Config.” - “Surr. Back” in the menu is set to “1 spkr”. (v
p. 198)
z3
Audio is output when the set sound mode name contains “+ Dolby Surround”.
z
4 Audio is output when “Subwoofer Mode” in the menu is set to “LFE+Main”. (
v
p. 204)
Contents Connections Playback Settings Tips Appendix
256
Front panel Display Rear panel Remote Index
Sound modes and surround parameters
Sound mode
Surround Parameter
Dialog Level
Adjust
Subwoofer
Level Adjust
Cinema EQ
Loudness
Management
z1
Dynamic
Compression
z2
Dialog
Control
z3
Low Frequency
z4
Delay Time
Direct/Pure Direct (2-channel) z5 Sz6 SS
Direct/Pure Direct (Multi-channel) z5 SS SS S
Stereo
S SS S
Multi Ch In
SSS S
Dolby Surround
SSSSS S
DTS Neural:X
SSSSS
Dolby Digital
SSSSS S
Dolby Digital Plus
SSSSS S
Dolby TrueHD
SSSSS S
Dolby Atmos
SSSSS S
DTS Surround
SSS S S
DTS 96/24
SSS S
DTS-HD
SSS S
DTS Express
SSS S
DTS:X
S S S SSS
Multi Ch Stereo
SSSSS S
Rock Arena
SS SS S S
Jazz Club
SS SS S S
Mono Movie
SS SS S S
Video Game
SS SS S S
Matrix
SS SS SS
Virtual
S SS S
z
1 -
z
6 : “Sound modes and surround parameters” (
v
p. 259)
Contents
Connections Playback Settings Tips Appendix
257
Front panel Display Rear panel Remote Index
77

Denon AVR-S910W Specifications

General

Receiver type	Surround
Audio output channels	7.2 channels
Power output per channel (1KHz@6 Ohm)	185 W
Power output per channel (20-20KHz@8 Ohm)	- W
HDMI in	8
Composite video in	2
Digital audio coaxial in	1
Wi-Fi	Yes
AM band range	520 - 1710 kHz
FM band range	87.5 - 107.9 MHz
Supported radio bands	AM, FM
Internet radio services supported	Pandora, SIRIUS Internet Radio, Spotify
Optical drive included	No
Display	-
Product color	Black
Audio decoders	Dolby Surround, Dolby TrueHD
AC input voltage	120 V
Power consumption (standby)	0.1 W
Power consumption (typical)	500 W
Audio formats supported	AAC, ALAC, FLAC, MP3, WAV, WMA

Weight and Dimensions

Depth	337.82 mm
Width	434.34 mm
Height	167.64 mm
Weight	9389 g