Denon AVR-X3000 Service Manual

Error
Code
Details of Error code Display Coping strategies
A1
Acquisition of (Application Mode)
IP address failed before rewriting
DM860A was rewritten (when timed
out).
C o n n e c t i o n F a i l A 1
Check the network connection.
Carry out the update in an environment that
has little network load.
A2
Invalid login via DPMS access was
notied DM860A related rmware
was rewritten (Application Mode).
L o g i n f a i l e d A 2
Check the network connection.
Carry out the update in an environment that
has little network load.
A3
Line congestion via DPMS access
was notied DM860A related
rmware was rewritten (Application
Mode).
S e r v e r i s b u s y A 3
Check the network connection.
Carry out the update in an environment that
has little network load.
A4
Connection failure via DPMS
access was notied DM860A related
rmware was rewritten (Application
Mode).
C o n n e c t i o n F a i l A 4
Check the network connection.
Carry out the update in an environment that
has little network load.
A6
Firmware data error message was
received after DPMS login when
DM860A related rmware was
rewritten (Application Mode).
U p d a t i n g f a i l A 6
Turn off and on the power. Updating starts
automatically.
Carry out the update in an environment that
has little network load.
A7
When DM860A related rmware
was rewritten (Application Mode),
request was made for rmware data
after DPMS login but it timed out.
U p d a t i n g f a i l A 7
Turn off and on the power. Updating starts
automatically.
Carry out the update in an environment that
has little network load.
AE
Firmware download error message
received (when download fails)
when DM860A related rmware was
rewritten (Boot Loader Mode).
D o w n l o a d f a i l A E
Turn off and on the power. Updating starts
automatically.
Carry out the update in an environment that
has little network load.
AF
Firmware download error message
received (line congestion) when
DM860A related rmware was
rewritten (Boot Loader Mode).
D o w n l o a d f a i l A F
Turn off and on the power. Updating starts
automatically.
Carry out the update in an environment that
has little network load.
B0
Firmware download error message
received (connection failure) when
DM860A related rmware was
rewritten (Boot Loader Mode).
D o w n l o a d f a i l B 0
Turn off and on the power. Updating starts
automatically.
Carry out the update in an environment that
has little network load.
B1
Firmware download error (timed
out) when DM860A related rmware
was rewritten.
D o w n l o a d f a i l B 1
Turn off and on the power. Updating starts
automatically.
Carry out the update in an environment that
has little network load.
B2
Error message received when
DM860A related rmware was
rewritten
U p d a t i n g f a i l B 2
Turn off and on the power. Updating starts
automatically.
Carry out the update in an environment that
has little network load.
B3
Firmware writing error message.
(Timeout failure )
U p d a t i n g f a i l B 3
Turn off and on the power. Updating starts
automatically.
Carry out the update in an environment that
has little network load.
B4
Error message received when
DM860A related rmware was
rewritten
U p d a t i n g f a i l B 4
Reset and update again.
B5
Mode change failure of DM860A.
(Application Mode)
U p d a t i n g f a i l B 5
Reset and update again.
70

Denon AVR-X3000 Specifications

General

Receiver type	Surround
Frequency range	10 - 100000 Hz
Output impedance	16 Ω
Input sensitivity	200 mV
Pre-out connectivity	Yes
Audio output channels	7.1 channels
Signal-to-Noise Ratio (SNR)	102 dB
Total Harmonic Distortion (THD)	0.08 %
Power output per channel (1KHz@6 Ohm)	135 W
Power output per channel (20-20KHz@8 Ohm)	105 W
HDMI in	7
Audio (L/R) in	5
Composite video in	3
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	2
Connectivity technology	Wired
Speakers connectivity type	Banana connector
Audio formats supported	AAC, FLAC, MP3, WAV, WMA
Image formats supported	JPG
Wi-Fi	No
RDS features	PTY, TP
AM band range	520 - 1710 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Internet radio services supported	Spotify, vTuner
Supported video modes	1080i, 1080p, 480p, 576p, 720p
Display	VFL
Color depth	24 bit
Aspect ratio	4:3, 16:9
Product color	Black
Audio decoders	DTS Neo:X, Dolby Digital, Dolby Digital EX, Dolby Digital Plus, Dolby Pro Logic II, Dolby Pro Logic IIx, Dolby Pro Logic IIz, Dolby TrueHD, DTS, DTS-ES (Discrete 6.1), DTS-ES (Matrix 6.1), DTS-HD, DTS-HD Master Audio
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Apple docking compatibility	iPhone, iPod
AC input voltage	230 V
AC input frequency	50 - 60 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	600 W
Cables included	AC

Weight and Dimensions

Depth	379 mm
Width	434 mm
Height	167 mm
Weight	10700 g