Denon AVR-X3000

Sound mode
Surround Parameter
Tone
z
9
Audyssey
Restorer
z
12
PRO LOGIC
g
/
g
x Music mode only
NEO:X
mode only
Panorama Dimension
Center
Width
Center
Gain
MultEQ®
XT
z
10
Dynamic
EQ
z
11
Dynamic
Volume
z
11
Audyssey
DSX®
DIRECT/PURE DIRECT (2-channel)
z
1
DIRECT/PURE DIRECT (Multi-channel)
z
1
DSD DIRECT (2-channel)
z
1
DSD DIRECT (Multi-channel)
z
1
STEREO
S S S S S
MULTI CH IN
S S S S S
DOLBY PRO LOGIC
g
z
S S S S S
DOLBY PRO LOGIC
g
x
S S S S S S S S
DOLBY PRO LOGIC
g
S S S S S S S S S
DOLBY PRO LOGIC
g
A-DSX
S S S S S S S S S
DTS NEO:X
S S S S S S
Audyssey DSX®
S S S S S S
DOLBY DIGITAL
S S S S S
DOLBY DIGITAL Plus
S S S S S
DOLBY TrueHD
S S S S S
DTS SURROUND
S S S S S
DTS 96/24
S S S S S
DTS-HD
S S S S S
DTS Express
S S S S S
MULTI CH STEREO
S S S S S
ROCK ARENA
Sz
13
S S S S
JAZZ CLUB
S S S S S
MONO MOVIE
S S S S S
VIDEO GAME
S S S S S
MATRIX
S S S S S
VIRTUAL
S S S S S
z
1,
z
9 –
z
13
z
1 During playback in PURE DIRECT mode, the surround parameters are the same as in DIRECT mode.
z
2 Audio is output when “Subwoofer Mode” in the menu is set to “LFE+Main”.
z
3 This setting is unavailable when the set sound mode name contains “+PL
g
Music” or “+NEO:X Music”.
z
4 This setting is possible when the sound mode is “Cinema” mode.
z
5 This item can be selected when a Dolby TrueHD signal is played.
z
6 This item can be selected when a Dolby Digital or DTS signal is played.
z
7 This item can be selected when a Dolby Digital or DTS signal or DVD-Audio is played.
z
8 This setting is available when the set sound mode name contains “+PL
g
z”.
z
9 This item cannot be set when “Dynamic EQ” is set to “On”.
z
10 This item cannot be set when Audyssey® Setup (Speaker Calibration) has not been performed.
z
11 This item cannot be set when “MultEQ® XT” is set to “Off” or “Graphic EQ”.
z
12 This item can be set when the input signal is analog, PCM 48 kHz or 44.1 kHz.
z
13 In this sound mode, bass is +6 dB, and treble is +4 dB. (Default)
83