Denon AVR-X7200W Service Manual

3.8. Operation Info Mode
3.8.1. Actions
This mode displays the accumulated operating time, power on count and each protection count.
3.8.2. Starting up
Hold down buttons "STATUS" and "ZONE3 SOURCE" at the same time and press the power button to turn on the power.
Select the "4. OP INFO" using the button "CURSOR
f
", and press the button "ENTER" to commit the selection.
3.8.3. Operations
Press the "STATUS" button after starting this device in Operation Info mode.
The following information is displayed in the following order.
(a) Accumulated operating time
FLD
L1
O p e r a t i o n T i m e
L2
T o t a l : H
↑Time display
"STATUS"
(b) Power on count
FLD
L1
P o w e r O n T i m e
L2
T o t a l :
↑Count display
"STATUS"
(c) DC / ASO Protection count
FLD
L1
P r o t e c t i o n T i m e
L2
D C : / A S O :
"STATUS"
(d) Thermal Protection count
FLD
L1
P r o t e c t i o n T i m e
L2
T H M E : / F :
"STATUS"
(e) CURRENT Protection count
FLD
L1
P r o t e c t i o n T i m e
L2
C u r r e n t :
"STATUS"
(Returns to normal display)
73

Denon AVR-X7200W Specifications

General

Receiver type	Surround
Input sensitivity	200 mV
Audio output channels	11.2 channels
Signal-to-Noise Ratio (SNR)	102 dB
Power output per channel (1KHz@6 Ohm)	190 W
Power output per channel (20-20KHz@8 Ohm)	210 W
HDMI in	8
Audio (L/R) in	7
Composite video in	5
Digital audio optical in	2
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	3
12V trigger	Yes
Speakers connectivity type	-
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Optical drive included	No
Display	LCD
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	780 W

Weight and Dimensions

Depth	427 mm
Width	434 mm
Height	196 mm
Weight	17800 g