Denon AVR-X7200W User Manual

7.1ch +
ZONE2
(Default):
0
Setting to assign the power amplifiers in this unit for
ZONE2 to 2-channels.
0
You can connect speakers for up to 9.1 channels for
MAIN ZONE.
Speakers to output audio are automatically switched
for playing back up to 7.1-channels in accordance with
the input signal and sound mode. (v
p. 245)
7.1ch +
ZONE3:
0
Setting to assign the power amplifiers in this unit for
ZONE3 to 2-channels
0
You can connect speakers for up to 9.1 channels for
MAIN ZONE.
Speakers to output audio are automatically switched
for playing back up to 7.1-channels in accordance with
the input signal and sound mode. (v
p. 246)
5.1ch +
ZONE2/3:
0
Setting to assign the power amplifiers within this unit
for ZONE2 and ZONE3 each to two different
channel.
7.1ch +
ZONE2/3-
MONO:
0
Setting to assign the power amplifiers in this unit for
ZONE2 and ZONE3 each to a different channel.
0
You can connect speakers for up to 9.1 channels for
MAIN ZONE.
Speakers to output audio are automatically switched
for playing back up to 7.1-channels in accordance with
the input signal and sound mode. (v
p. 247)
7.1ch (Bi-
Amp):
0
Setting to assign the power amplifiers in this unit for
front speaker bi-amp connection to 2-channels.
0
You can connect speakers for up to 9.1 channels for
MAIN ZONE.
Speakers to output audio are automatically switched
for playing back up to 7.1-channels in accordance with
the input signal and sound mode. (v
p. 248)
5.1ch (Bi-
Amp) +
ZONE2:
0
Setting to assign the power amplifiers in this unit for
front speaker bi-amp connection to 2-channels.
0
Setting to assign the power amplifiers in this unit for
ZONE2 to 2-channels.
Contents Connections Playback Settings Tips Appendix
236
Front panel Display Rear panel Remote Index

Denon AVR-X7200W Specifications

General

Receiver type	Surround
Input sensitivity	200 mV
Audio output channels	11.2 channels
Signal-to-Noise Ratio (SNR)	102 dB
Power output per channel (1KHz@6 Ohm)	190 W
Power output per channel (20-20KHz@8 Ohm)	210 W
HDMI in	8
Audio (L/R) in	7
Composite video in	5
Digital audio optical in	2
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	3
12V trigger	Yes
Speakers connectivity type	-
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Optical drive included	No
Display	LCD
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	780 W

Weight and Dimensions

Depth	427 mm
Width	434 mm
Height	196 mm
Weight	17800 g