Denon AVR-X7200W User Manual

9.1ch/
2ch
Front:
0
Setting to assign the power amplifiers in this unit for
connecting 2-channel playback speakers to 2 channels.
0
You can switch the front speakers when using 2-channel
playback in direct mode or stereo mode, or when using
multi-channel surround playback. (v p. 249)
When setting speakers for 2-channel playback, also
perform the “2ch Playback” setting. (v
p. 268)
7.1ch/
2ch
Front
(Bi-
Amp):
0
Setting to assign the power amplifiers in this unit for the
bi-amp connection of the 2-channel playback speakers
to 4 channels.
0
You can switch the front speakers when using 2-channel
playback in direct mode or stereo mode, or when using
multi-channel surround playback.
When setting speakers for 2-channel playback, also
perform the “2ch Playback” setting. (v p. 268)
7.1ch +
Front B:
0
Setting to assign the power amplifiers within this unit
for connecting the second set of front speakers.
0
You can switch between the desired combination of
front speakers A and front speakers B. (v p. 250)
Switch the front speaker using the “Front Speaker”
setting. (v p. 268)
Dolby
Atmos :
0
Setting to assign the power amplifiers within this unit
for the speaker layout suitable for Dolby Atmos
playback. (v p. 252)
When using the front height, rear height or Dolby Atmos
Enabled speakers for Dolby Atmos playback, set
“Assign Mode” to either “11.1ch” or “9.1ch”.
Pre
Amplifier:
0
All of the speakers are connected using an external
power amplifier and this unit is used as an integrated
amplifier.
0
You can connect speakers for up to 13.1 channels for
MAIN ZONE.
Speakers to output audio are automatically switched for
playing back up to 11.1 channels in accordance with the
input signal and sound mode. (v
p. 253)
Custom:
0
The internal amplifier of this unit is assigned as
desired.
0
You can connect speakers for up to 13.1 channels for
MAIN ZONE.
Speakers to output audio are automatically switched for
playing back up to 11.1 channels in accordance with the
input signal and sound mode. (v
p. 255)
Contents Connections Playback Settings Tips Appendix
237
Front panel Display Rear panel Remote Index

Denon AVR-X7200W Specifications

General

Receiver type	Surround
Input sensitivity	200 mV
Audio output channels	11.2 channels
Signal-to-Noise Ratio (SNR)	102 dB
Power output per channel (1KHz@6 Ohm)	190 W
Power output per channel (20-20KHz@8 Ohm)	210 W
HDMI in	8
Audio (L/R) in	7
Composite video in	5
Digital audio optical in	2
Ethernet LAN (RJ-45) ports	1
Component video (YPbPr/YCbCr) in	3
12V trigger	Yes
Speakers connectivity type	-
AM band range	522 - 1611 kHz
FM band range	87.5 - 108 MHz
Supported radio bands	AM, FM
Optical drive included	No
Display	LCD
Product color	Black
Audio decoders	Dolby TrueHD, DTS 96/24, DTS-ES, DTS-HD Master Audio
AC input voltage	230 V
AC input frequency	50 Hz
Power consumption (standby)	0.1 W
Power consumption (typical)	780 W

Weight and Dimensions

Depth	427 mm
Width	434 mm
Height	196 mm
Weight	17800 g