Denon D-A03 - AUTO Pre-Adjustment Mode (Low Reflection Disc Only); AUTO Adjustment Mode; AFB Adjust Mode

14
D-A03
2. AUTO pre-adjustment mode (Low reflection disc only)
: Adjustment name
3. AUTO adjustment mode
Step No. Setting Method Remarks Display
Step 1 Test mode stop status tsm e
Step 2 Press once the CD PLAY button Auto adjustment menu AUTO_AJST_
Step 3 Press REC button Auto pre-adjust menu _AUT_YOBI_
Step 4 Press ENTER button change as follows during auto-adjust :_ _ _ _ _ _
HAo TCO
End of adjustment If the adjust OK, go to Step 5
If the adjust NG, go to Step 6
Step 5 Grating adjustment _COMPLETE_
Adjust value output
Press STOP button Step 3
Step 6 Adjust value output Can’t_ADJ.
Press STOP button Return to Step 3
: Adjustment name, : Measured value, : Address
Step No. Setting Method Remarks Display
Step 1 Test mode stop status tsm e
Step 2 Press CD PLAY button Auto adjust menu AUTO_AJST_
Step 3 Press MD PLAY button With high reflection disc, change as follows : _ _ _ _ _
PEG---HAG
With low reflection disc, change as follows
PEG---LAG
End of adjustment If the adjust OK, go to Step 4
If the adjust NG, go to Step 7
Step 4 Adjust value output For grating adjustment _ COMPLETE _
Press MD PLAY button Step 5
Press MD STOP button Step 2
Step 5 Continuous play (pit part) C1 error check s c
Continuous play (groove part) a c
Step 6 Press CD STOP button ADIP error check a a
Press MD STOP button Returns to Step 2
Step 7 Adjust value output Can’t_ADJ.
Press MD STOP button Returns to Step 2
Step No. Setting Method Remarks Display
Step 1 Test mode stop status tsm e
Step 2 Press CD PLAY button 2 times AFB adjust menu _AUT_AFB_
Step 3 Press MD PLAY button FAB _
Step 4 Adjust value output
Press MD STOP button Returns to Step 2
, : Measured value
4. AFB Adjust Mode