Denon DBP-1611UD - Configuring New BD Mecha Unit Settings

21
()AttachtheBDMECAUNITASSYforreplacementtothesetunit.(Whenassemblingtheunit,performthestepsin
reverseorder.)
(6) Checkthatthe4P-FFC,9P-FFCandP-Pconnectorcordshavebeenconnected.
2.4. Conure the settins of the set tht contins the ne BD MECA UNIT
(1)Checkthelaseramperage(seelaseronoffmodeinthetestmode(page2)).
Checkthatthevaluesare6mAfromtheinitialvalueforBD,and12mAfromtheinitialvalueforDVDCD.
(2)Clearthetotallaserusagetime(seetheprocedureforclearingtheaccumulatedlaserontimeintestmode(page
26)).
(3) CheckBD,DVD,andCDmediaplayback.
(4)Iftherearenoproblemswithplayback,removethedisc,presstheONSTANDBYbuttontoswitchtostandbystatus,
andremovetheACplugfromtheACsocket.
() Attachthetopcover,andthiscompletesthereplacementprocedure.