Denon DBT-3313UDCI

30
3. Tray lock mode
3.1. preparation
(1) Equipment used: None
(2) Unit setting: No spec other than the following procedure.
3.2. procedure
[Setting]
(1) Pressing the
1
and
8
buttons for simultaneously, plug the AC cord into a power outlet.
(2) "TRAY LOCK" is displayed on the FL tube and tray opening/closing is invalidated.
[Cancel]
(1) Unplug this model's AC cord from the power outlet.
(2) Pressing the
1
and
8
buttons for simultaneously, plug the AC cord into a power outlet.
(3) "PLEASE WAIT" is displayed on the FL tube and tray opening/closing is enabled.
b
The tray lock mode is also canceled when the product is initialized.
4. Remote lock mode
4.1. preparation
(1) Equipment used: None
(2) Unit setting: No spec other than the following procedure.
4.2. procedure
[Setting]
(1) Pressing the PURE DIRECT and
9
buttons for simultaneously.
(2) “Lock-On” is displayed on the FL tube, and operations with the remote control and the REMOTE CONTROL input
terminal on the back of the DBT-1713UD are disabled.
[Cancel]
(1) Pressing the PURE DIRECT and
9
buttons for simultaneously.
(2) "Lock-Off" is displayed on the FL tube and remote lock mode is made canceled.
5. All Lit / All Off mode for the FL tube
5.1. preparation
(1) Equipment used: None
(2) Unit setting: No spec other than the following procedure.
5.2. procedure
[Setting]
(1) Pressing the PURE DIRECT and
8
buttons for simultaneously, plug the AC cord into a power outlet.

If All Lit / All Off mode is set for the FL tube, the FL tube’s display area is fully lit.
(2) Press the PURE DIRECT button to ‘all off’ display.
[Cancel]
(1) Remove the power cable for 5 seconds or more to cancel All Lit / All Off mode for the FL tube.