FRONT PANEL ASSY
Refer to "DISASSEMBLY
1. FRONT PANEL ASSY"
and "EXPLODED VIEW"
FRONT PANEL ASSY
(Ref. No. of EXPLODED VIEW : 1-12)
DISPLAY PCB UNIT
(Ref. No. of EXPLODED VIEW : 13)
BD MECHA UNIT ASS'Y
Refer to "DISASSEMBLY
2. BD MECHA UNIT ASSY"
and "EXPLODED VIEW"
MAIN PCB UNIT ASSY
(Ref. No. of EXPLODED VIEW : 43)
MAIN PCB UNIT ASS'Y
Refer to "DISASSEMBLY
3. MAIN PCB UNIT ASSY"
and "EXPLODED VIEW"
MAIN PCB UNIT ASSY
(Ref. No. of EXPLODED VIEW : 43)
POWER PCB UNIT ASS'Y
Refer to "DISASSEMBLY
5. POWER PCB UNIT ASS'Y"
and "EXPLODED VIEW"
POWER PCB UNIT
(Ref. No. of EXPLODED VIEW : 47)
AUDIO PCB UNIT ASS'Y
Refer to "DISASSEMBLY
4. AUDIO PCB UNIT ASS'Y"
and "EXPLODED VIEW"
AUDIO PCB UNIT
(Ref. No. of EXPLODED VIEW : 44)
IR PCB UNIT ASS'Y
Refer to "DISASSEMBLY
4. IR PCB UNIT ASS'Y"
and "EXPLODED VIEW"
IR PCB UNIT
(Ref. No. of EXPLODED VIEW : 46)
TOP COVER
9
DISASSEMBLY
• Disassemble in order of the arrow in the following gure.
• In the case of the re-assembling, assemble it in order of the reverse of the following ow.
• In the case of the re-assembling, observe "attention of assembling".
• If wire bundles are untied or moved to perform adjustment or replace parts etc., be sure to rearrange them neatly as
they were originally bundled or placed afterward.
Otherwise, incorrect arrangement can be a cause of noise generation.
To Next Page
Loading...
