33
(3) Accumulated laser on time display mode
Press the
8
or
9
button to select [Y] and press the
1
button to set it.
The accumulated laser on time is displayed.
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
T C Y m m m m m m h
(Y=1 : CD, 2 : DVD , 3 : BD, mmmmmm : Time(Fractions of hours are counted up one hour on the display.)
When the
2
button is pressed, the layer above the current layer is displayed. See "6.4 Stopping the mode".
---To clear the accumulated laser on time---
Press the
1
button while the accumulated laser on time is displayed ("TC1, "TC2", "TC3" ) until "TC4
＊
clear??"
appears at the display.
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
T C 4 * c l e a r ? ?
If the
1
button is pressed, the accumulated laser on time of CD, DVD and BD is cleared.
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
T C 1 0 h
When "TC1", "TC2" or "TC3" is selected with the
8
or
9
button, "mmmmmm" is displayed as "0" so you can
check.
(4) Test mode cancel
A conrmation message is displayed. Press the
1
button to set, canceling the test mode.
FL Display (The display part of 13 digits)
1 2 3 4 5 6 7 8 9 10 11 12 13
T I 1 R e a l l y ?
When the
2
button is pressed, the layer above the current layer is displayed. See "6.4 Stopping the mode".
To Next Page
Loading...
