2
Features
High precision 24-bit 192 kHz D/A converter and
strictly selected parts
This D/A converter, strictly selected parts and the audio circuit
design that DENON has developed over many years masterfully
reproduce the delicate nuances of music in the audio signal.
Digitally transmitted play function for iPhone/
iPod/USB memory player via USB
A USB port is mounted on the Front Panel. MP3/WMA files can be
played by connecting a USB Player or USB memory device.
An iPod is connected using the USB cable supplied with the
iPod. Music files in an iPod, USB Player or USB memory device
are transmitted via digital signal and can be enjoyed at high audio
quality using the this unit’s own audio circuitry.
Playback of MP3 and WMA files
Supports playback of discs and USB memory devices on which
MP3 or WMA files are recorded. The unit’s display can display the
title of the track and the name of the artist of the current track.
Usable characters “Switching the display” (vpage13, 16)
Two line FL display for easy reading, setup
Text information appears on the display during MP3 or iPod
playback. Two-line front display, to easily identify music tracks.
Auto Standby mode for save the energy
Accessories
Check that the following parts are supplied with the product.
q Getting Started ........................................................................ 1
w CD-ROM (Owner’s manual) .................................................... 1
e Safety Instructions .................................................................. 1
r Service network list ................................................................. 1
t Coaxial digital cable ................................................................. 1
y System cable ........................................................................... 1
yt
Cautions on handling
•Before turning the power switch on
Check once again that all connections are correct and that there are
no problems with the connection cables.
•Power is supplied to some of the circuitry even when the unit is set
to the standby mode. When leaving home for long periods of time,
be sure to unplug the power cord from the power outlet.
•Proper ventilation
If the unit is left in a room full of smoke from cigarettes, etc., for
long periods of time, the surface of the optical pickup may get dirty,
preventing it from receiving signals properly.
•About condensation
If there is a major difference in temperature between the inside of
the unit and its surroundings, condensation may form on parts inside
the unit, causing it to fail to operate properly.
If this happens, let the unit sit for an hour or two with the power
turned off and wait until there is little difference in temperature
before using the unit.
•Cautions on using mobile phones
Using a mobile phone near this unit may result in noise. If that
occurs, move the mobile phone away from the unit when it is in use.
•Moving the unit
Be sure to remove a disc, turn off the power and unplug the power
cord from the power outlet. Next, disconnect the connection cables
to other system equipment before moving the unit.
•About care
•Wipe the cabinet and control panel clean with a soft cloth.
•Follow the instructions when using a chemical cleaner.
•Benzene, paint thinner or other organic solvents as well as
insecticide may cause material changes and discoloration if brought
into contact with the unit, and should therefore not be used.
n About the remote control unit
No remote control unit is included with the DCD-F109.
When the DCD-F109 and DRA-F109 (stereo receiver, sold
separately) are connected using the system cable included
with the DCD-F109 (system connections), the DCD-F109 can
be controlled using the remote control unit included with the
DRA-F109.
•This owner’s manual includes descriptions of operations
using the remote control unit included with the DRA-
F109.
•For details about the remote control unit, see the DRA-
F109’s owner’s manual.
To Next Page
Loading...
Need help?
General
Weight and Dimensions
