6
Connecting the power cord
Wait until all connections have been completed before connecting the power cord.
To household power outlet
(AC 230 V, 50/60 Hz)
Connecting to the AC OUTLET
UNSWITCHED (Total capacity: 100 W (0.43 A):
This does not link with the main unit’s X button.
Make sure the total power consumption of the connected
devices does not exceed 100 W (0.43 A).
NOTE
•Do not plug in the power cord until all connections have been completed.
•Do not bundle power cords together with connection cables. Doing so can result in humming or noise.
•Insert the AC plugs securely. Incomplete connections could cause noise.
Do not unplug the power cord before the power indicator turns off and the DCD-F109 enters Standby
mode.
•The AC outlet is for use with audio components. Do not use it to connect hair dryers or any equipment
other than audio components.
To Next Page
Loading...
