EasyManua.ls Logo

Denon DN-V200 - Page 25

Denon DN-V200
120 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
25
ENGLISH
w
When 96k LPCM OUT is selected:
Press the ENTER button several times and select the conversion
mode.
96k (Factory default)
When playing linear PCM DVDs that are not copyright-protected, for
2-channel PCM audio signals up to 96 kHz, linear PCM signals are
output as such without being converted from the digital outputs.
PCM signals of 48 kHz/16 bits and lower are output, regardless of
whether they are copyright-protected or not.
For DVDs containing multi-channel PCM signals, the digital signals
are down-mixed for output into two channels, front left and right.
(Only the front left and right channels are output for sources for
which down-mixing is prohibited.)
When playing copyright-protected linear PCM DVDs, in consideration
of copyrights, no digital signals are output for sources exceeding 48
kHz/16 bits. When playing such sources, either set to 96k>48k or
make analog connections (see page 14).
96k>48k
Linear PCM and packed PCM signals are converted to 44.1 kHz or
48 kHz and output. (The PCM digital audio output signals are
converted to 48 kHz or less in consideration of copyrights.) When
making digital connections to an AV amplifier that is not compatible
with 96 kHz/88.2 kHz signals, set to 96k>48k.
When playing DVDs recorded in linear PCM or packed PCM and the
unit is set to output digital and analog audio signals simultaneously,
the analog audio output signals are also converted to 48 kHz or
below, so we recommend setting to 96k and also making analog
connections.
e
When DOWNMIX is selected:
Press the ENTER button several times and select the output format.
LT/RT (Factory default)
Set this when connecting the unit to a Dolby Pro Logic decoder.
STEREO
Set this when connecting the unit to a stereo device.
r
When COMPRESSION is selected:
OFF (Factory default)
Select this for the standard range.
LEVEL
Select this to achieve powerful sound even when the volume is low.
This setting is suited for watching DVDs late at night with the
volume low. (This setting is only valid for DVDs recorded in Dolby
Digital.)
SELECT
SET ENT ER BUTTON
AUDIO SETUP
DIGITAL OUT
DOWNMIX
96K LPCM OUT
COMPRESSION
PCM
96K
LT/RT
OFF
SET 96K LPCM TO 48K OUT
SELECT
SET ENT ER BUTTON
AUDIO SETUP
DIGITAL OUT
DOWNMIX
96K LPCM OUT
COMPRESSION
PCM
96K
LT/RT
OFF
SET DOWNMIX MODE
SELECT
SET ENT ER BUTTON
AUDIO SETUP
DIGITAL OUT
DOWNMIX
96K LPCM OUT
COMPRESSION
PCM
96K
LT/RT
OFF
DYNAMIC RANGE COMPRESSION
3
Remote control unit
ENTER
Remote control unit
To exit the setup mode
Press the RETURN or SETUP button.

Related product manuals