Why is my Denon Stereo Receiver display lit but there is no sound?
If your Denon Stereo Receiver's display is lit but there's no sound, there might be a few reasons: * Check if the speaker cables are securely connected. * Ensure the INPUT SELECTOR knob is in the correct position. * Verify the volume isn't set to minimum; turn it up. * Make sure MUTING is switched off.
General| Impedance | 8 Ω |
|---|---|
| Receiver type | stereo |
| Frequency range | 20 - 20000 Hz |
| Maximum input power | 75 W |
| Audio output channels | - channels |
| Total Harmonic Distortion (THD) | 0.05 % |
| Power output per channel (20-20KHz@8 Ohm) | 95 W |
| AirPlay | No |
| Display | - |
| Equalizer | Yes |
| Product color | Black |
| Apple docking compatibility | Not supported |
| RDS features | EON |
| AM band range | 522 - 1611 kHz |
| FM band range | 87.5 - 108 MHz |
| Supported radio bands | FM, MW |
| Preset stations quantity | 56 |
| Connectivity technology | Wired |
| HDMI in | 0 |
| Audio (L/R) in | 5 |
| Audio (L/R) out | 2 |
| Headphone outputs | 1 |
| Headphone connectivity | 6.3 mm |
Weight and Dimensions| Depth | 414 mm |
|---|---|
| Width | 434 mm |
| Height | 147 mm |
| Weight | 9000 g |
To Next Page
