ENGLISH
ENGLISH
20
Specifications
Specifications
¢ Audio section
• Power amplifier
Rated output: 75 W + 75 W (8 Ω/ohms, 20 Hz ~ 20 kHz with 0.08 % T.H.D.)
Output terminals: A or B 4 ~ 16 Ω/ohms
A + B 8 ~ 16 Ω/ohms
• Analog
Input sensitivity / input impedance: 200 mV / 47 kΩ/kohms
Frequency response: 10 Hz ~ 100 kHz: +1, –3 dB (TONE DEFEAT ON)
S/N: 98 dB (IHF-A weighted) (TONE DEFEAT ON)
¢ Tuner section [FM] [AM]
(note: µV at 75 Ω/ohms, 0 dBf = 1 x 10
–15
W)
Receiving Range: 87.50 MHz ~ 108.00 MHz 522 kHz ~ 1611 kHz
Usable Sensitivity: 1.0 µV (11.2 dBf) 18 µV
50 dB Quieting Sensitivity: MONO 1.6 µV (15.3 dBf)
STEREO 23 µV (38.5 dBf)
S/N (IHF-A): MONO 77 dB (IHF-A weighted)
STEREO 72 dB (IHF-A weighted)
Total Harmonic Distortion (at 1 kHz): MONO 0.15 %
STEREO 0.3 %
¢ General
Power supply: AC 230 V, 50 Hz
Power consumption: 235 W
1 W Max (Standby)
Maximum external dimensions: 434 (W) x 147 (H) x 414 (D) mm
Mass: 9 kg
¢ Remote control unit (RC-1055)
Batteries: R03/AAA Type (Two batteries)
External dimensions: 49 (W) x 220 (H) x 23 (D) mm
Mass: 115 g (included batteries)
* For purposes of improvement, specifications and design are subject to change without notice.
To Next Page
Loading...
