TUNING
BAND
FUNCTION
MENU/SET
FUNCTION
[NUMBER]
MENU/SET
BAND
[ENTER/MEMO]
TUNING
[CLEAR/DEL]
[
9
]
[
8
]
About the button names in this explanation
<>: Buttons on the main unit
[]: Buttons on the remote control unit
Button name only :
Buttons on the main unit and remote control unit
Set the cassette deck to the recording mode.
For instructions, see the recorder’s operating instructions.
2
Recording
• The function can be selected by turning <FUNCTION> clockwise
or counterclockwise.
1
“PORTABLE IN” can only be selected when a portable player
is connected.
2
“iPod” is displayed instead of “AUX” when an Control Dock
for iPod is connected.
Use FUNCTION to select the function for the source to
be recorded.
1
CD/HDD
TAPEMD PHONOAUX (iPod)
TUNER PORTABLE IN
1
2
• Adjusting the volume or tone does not affect the sound being
recorded.
• Noise may be produced in the sound when receiving AM broadcasts
if there is a TV or other such device nearby. If so, move the DRA-
F102 DAB and TV as far apart as possible.
Use BAND to select the reception band.
Use TUNING to tune in the station.
• The “TUNED” indicator lights when a station is tuned in.
Selecting a radio station
Use FUNCTION to select “TUNER”.
• The reception frequency is displayed.
2
3
1
¢ FM station reception conditions
• The “ST” indicator lights when a stereo broadcast is tuned in.
(When the reception band mode is set to “FM AUTO”.)
• If the signal is weak and the stereo broadcast reception is not
stable, set the reception band mode is set to “FM MONO”. The
“MONO” indicator lights.
¢ Auto tuning
If one of TUNING is pressed and held in, the next station is
searched for automatically.
Stations cannot be tuned in if their signal is weak.
¢ To stop auto tuning
Press one of TUNING.
¢ Manual tuning
The reception frequency changes one step each time one of
TUNING is pressed.
Start playing the source.
For instructions on operating, see the player’s operating
instructions.
3
To Next Page
Loading...
