13
Operation Operation
Press MENU/SET three times.
• The name input mode is set.
Use [8] or [9] to select the desired character.
Up to 8 characters can be input.
The characters that can be input are as shown below.
Use TUNING to move the cursor.
Press [CLEAR/DEL] to delete characters.
Giving a name to the currently tuned in
broadcast station and presetting it
Presetting broadcast stations automatically
(Auto preset)
Listening to preset broadcast stations
Tune in the broadcast station ( page 12).
• The reception frequency is displayed.
2
Use [8] or [9] to select the preset number, then
press [ENTER/MEMO].
• The reception frequency and reception mode are preset.
6
3
1
Press and hold MENU/SET.
• “AUTO PRESET” is displayed
Use FUNCTION to select “TUNER”.
• The reception frequency is displayed.
2
Press MENU/SET.
• Broadcast stations are preset automatically.
3
1
•A total of 40 FM and AM broadcast stations combined can be
preset.
•Preset stations can be given names of up to 8 characters.
NOTE:
• If a station is preset at a number where a station has already
been preset, the old setting is deleted and replaced with the
new setting.
• Broadcast stations whose signals are weak cannot be preset
automatically. To preset them, tune them in manually, then follow
the operation described at “Giving a name to the currently tuned in
broadcast station and presetting it”.
Example: To listen to the FM station preset at preset number 3.
Press [ENTER/MEMO].
4
AB C D E F G H I J K L M N O P Q R S T U V W X Y Z
0 1 2 3 4 5 6 7 8 9
^ ’ ( )
*
+ , – . / = (space)
¢ To change the name of a preset station:
qCall out the station whose name you want to change, then press
MENU/SET three times.
wPerform step 3, 4 under “Giving a name to the currently tuned in
broadcast station and presetting it”.
¢ To only preset the station:
qPress [ENTER/MEMO] while the station is tuned in.
The “MEMO” indicator flashes.
wPerform step 5 under “Giving a name to the currently tuned in
broadcast station and presetting it”.
Press [3] (Number).
•Preset number “3” is displayed.
For track numbers 1 to 10, press the corresponding button ([1] to
[10]).
For track numbers 10 and on, first press [+10] then press buttons
[1] to [10].
Example: Track 12 : [+10] [2].
Example: Track 20 : [+10] [10].
The preset number can also be chosen using [8] or [9].
To Next Page
Loading...
