Denon DRR-F101 User Manual

9
ENGLISH
RECORDING
9
(1)
Starting Recording
(2)
Stopping Recording
CD SRS
REC
0
1
PLAY
CASSETTE DECK DRR-F101
REC
CD SRS
PLAY
ON / STANDBY
e
DOLBY NR
ON
OFF
REVERSE
MODE
1
5
4
2
6
7
2.3 8
CD SRS
REC
0
1
PLAY
CASSETTE DECK DRR-F101
REC
CD SRS
PLAY
ON / STANDBY
e
DOLBY NR
ON
OFF
REVERSE
MODE
1
1
2
3
4
Turn on the power.
Load the cassette tape onto which
you want to record.
✽ Load the cassette tape with side A
facing up.
✽ Refer to page 7.
Close the cassette holder.
Set the reverse mode.
✽ Refer to page 7.
ON / STANDBY
REVERSE
MODE
5
1
Set the Dolby NR mode.
6
7
8
9
Press the recording button.
• The recording pause mode is set.
During recording, press the stop
button.
• Playback stops.
DOLBY NR
ON
OFF
NOTE:
• Be sure to press the stop button (
2 ) to stop
recording before turning off the power or
unplugging the power cord.
Press the play button (PLAY).
• Recording starts
Start playing the track on the CD player or MD
recorder.
PLAY
Set the DRR-F101‘s play direction
indicator (
0 or 1) to the direction in
which you want to record.
RC-927
REMOTE CONTROL UNIT
CLEAR
123
546
789
+1010
CD SRS
MDTAPE
TUNING
REPEAT
CALL
PROG/
DIRECT
RANDOM
BAND
RDS
DIMMER
TIME/
PANEL
TIME EDIT
SYSTEM
POWER
OFF ON
STOP PLAY
VOLUME
/SELECT
SLEEP MODE
TAPE
FUNCTION
PRESET
+
-
TUNER
CD
MD
TAPE
SYSTEM FUNCTIONS
10
2 Operation is even easier when the components in the D-F101 series are connected to the DRR-F101 with system
connections. (For instructions on connections, refer to “CONNECTIONS” on page 5 and refer to the respective
operating instructions of receiver (DRA-F101).)
2 The system functions will only work when the components of the D-F101 series are connected. They will not work
with other components. To use the system functions, connect the receiver (DRA-F101).
2 When the DRR-F101 is used in a system with the D-F101 series, it can be operated with the system remote control
unit (RC-927) included with the receiver (DRA-F101).
2 When system connections are made, all the remote control signals are received at the DRA-F101‘s remote sensor.
2 The buttons on the remote control unit function in the same way as the corresponding buttons on the set. (Refer to
“PART NAMES AND FUNCTIONS” on page 6.)
2 For instructions on operating the receiver (DRA-F101) and CD player (DCD-F101) and MD player (DMD-F101), refer to
the respective operating instructions.
2 The system function signals for operating the components in the D-F101 series are all output from the receiver (DRA-
F101). Thus, when making system connections, be sure to connect the receiver (DRA-F101).
(1)
System Remote Control
2 Names of remote control unit buttons (cassette deck section)
Power standby button
(SYSTEM POWER STANDBY)
Press this to set the system’s
power to the standby mode.
(This button cannot be used to
set the DRR-F101’s power
individually to the standby
mode.)
Power on button (SYSTEM
POWER ON)
Play button (1)
Stop button (2)
Direction selector
button (
01)
Press this to turn on the
system’s power.
(This button cannot be used to
turn on only the DRR-F101’s
power.)
Rewind button (6)
Fast-forward button (7)
CD synchronized recording
button (CD SRS TAPE)
Power on button
(SYSTEM POWER ON)
REC
Function selector switch
Use this to select which
function to operate with the
remote control unit. Set the
switch to “TAPE” to operate
the DRR-F101.

Denon DRR-F101 Specifications

General

Brand	Denon
Model	DRR-F101
Category	Cassette Player
Language	English