6
DISASSEMBLY
• Disassemble in order of the arrow in the following gure.
• In the case of the re-assembling, assemble it in order of the reverse of the following ow.
• In the case of the re-assembling, observe "attention of assembling".
• If wire bundles are untied or moved to perform adjustment or replace parts etc., be sure to rearrange them neatly as
they were originally bundled or placed afterward.
Otherwise, incorrect arrangement can be a cause of noise generation.
Bottom BASE
Refer to "DISASSEMBLY
2. BOTTOM BASE"
and "EXPLODED VIEW"
I/O PCB ASS'Y
Refer to "DISASSEMBLY
11-4. I/O PCB ASS'Y"
and "EXPLODED VIEW"
I/O PCB ASS'Y
(Ref. No. of EXPLODED VIEW : 6)
PHONE PCB ASS'Y
Refer to "DISASSEMBLY
3. PHONE PCB ASS'Y"
and "EXPLODED VIEW"
PHONE PCB ASS'Y
(Ref. No. of EXPLODED VIEW : 8)
TOP PANEL ASS'Y
Refer to "DISASSEMBLY
4. TOP PANEL ASS'Y"
and "EXPLODED VIEW"
TOP PANEL ASS'Y
(Ref. No. of EXPLODED VIEW : 2)
WHEEL ASS'Y
Refer to "DISASSEMBLY
10. WHEEL ASS'Y"
and "EXPLODED VIEW"
WHEEL ASS'Y
(Ref. No. of EXPLODED VIEW : 3)
CROSS FADER PCB ASS'Y
Refer to "DISASSEMBLY
6. CROSS FADER PCB ASS'Y"
and "EXPLODED VIEW"
CROSS FADER PCB ASS'Y
(Ref. No. of EXPLODED VIEW : 5)
CONTROL PCB ASS'Y / SOFT KNOB
Refer to "DISASSEMBLY
5. CONTROL PCB ASS'Y / SOFT KNOB"
and "EXPLODED VIEW"
CONTROL PCB ASS'Y
(Ref. No. of EXPLODED VIEW : 7)
BUTTON
Refer to EXPLODED VIEW
To Next Page
Loading...
Need help?
General
