EasyManua.ls Logo

Denver CDB-440BT - TA-VOLUME & REGULATION

Denver CDB-440BT
21 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
13
OPERATION
When the filed strength level of EON linked
is less than threshold level, the radio does
not switch that station, and a customer can
hardly listen to any disturbances.
When EON TA LOCAL mode is selected,
“EON TA LO” on numeric display is
indicated for a few seconds.
EON TA DISTANCE mode
EON TA switch is tried to implemented
by the information of current station.
When EON TA DISTANCE mode is
selected, “EON TA DX” on numeric
display is indicated for a few seconds.
TA-VOLUME: Volume 30 (the default TA
volume value is 30). You can set it to
another value. When a Traffic
Announcement is received. If the main
volume is small than the TA VOL value.
It will turn up the main volume to the TA
VOL value.
REG: OFF/ON
REGION ON mode: AF switching or PI
SEEK is implemented to the station
which have all PI codes are the same as
current station.
REGION OFF mode: The regional code
in the format of PI code is ignored when
AF switching or PI SEEK is
implemented.
- Listening to Traffic Announcement
When TA mode is on and a traffic
announcement is transmitted:
When the unit was in USB/SD mode or
AUX IN mode, it will switch temporarily
to radio mode.
Temporary switch over to an EON linked
station when EON detects a traffic
announcement on that other program.
If the volume level was under the
threshold point it will be raised to the
threshold point. But the user changed
the volume level, which was more than
the threshold point (min. TA volume
level), it will be set to the last level.
When TA mode is on, TA of individual
segment is turned on.
When a TP station is received, TP of
individual segment is turned on.
TA interruption function
The current traffic announcement is
cancelled by pressing this key.
But the TA mode will not be off.
The RDS data used are the PI, PS, AF,
TP, TA, EON and PTY data.
PI: Program Identification code
Code for identifying programs
PS: Program Service Name
Broadcast station name data
expressed in alphanumerically
characters
AF: Alternative Frequencies
Frequency list of broadcasting
stations transmitting the same
program
TP: Traffic Program Identification
Identification data for traffic
information-broadcasting station
TA: Traffic Announcement Identification
Identification data showing traffic
information is being transmitted or
not.
EON: Enhanced Other Networks
Information
Broadcasting information on PI, AF,
TP, TA, etc, relating to networks
other than the network used for
current reception
PTY: Program Type Code
Contents of programs such as news,
light music, sports etc.
USB PLAY OPERATION
SWITCH TO USB MODE
In the front panel of the unit, there is an

Other manuals for Denver CDB-440BT

Related product manuals