Denver CDB-440BT - BLUETOOTH PAIRING

16
OPERATION
The USB solution can support:
1. Folder: 500 max.
2. File: 999 max.
3. Depth of folder: 8 layers
4. Size: 2 GB
Note
：
 The main unit can only support the
standard USB-memory disc which is
approved by Microsoft.
 USB MP3 player is not a standard
which means different brand name or
different models have their own
standard. So our product cannot
support every MP3 player.
 When connecting an MP3 player and
there has normal battery in the player
(non rechargeable battery), you should
remove the battery from the MP3
player then connect it to the USB
interface. Otherwise, it may cause
battery burst.
SD OPERATION (OPTIONAL)
The unit has a SD interface (on the housing
of the unit).
When you insert a SD card in the
SD interface, the unit will search the
MP3/WMA files and start to play
automatically. The operation is the same
with the MP3 operation described above. If
in other mode, you can also press MODE
button (1) to elect SD mode.
CAUTION
When there are important files in the USB
device/SD card or disc. Do not connect it to
the main unit to play. Because any wrong
operation may cause files loss. And our
company assumes no responsibility for this.
BLUETOOTH OPERATION
 PREPAIR FOR BLUETOOTH
OPERATION
(i) When use Bluetooth, please make
sure the mobile phone supports
Bluetooth function.
(ii) For the different kind of mobile
phone, Bluetooth emissive power has
some difference. To get the best
conversation quality, it is commended
that the distance between the mobile
phone and the unit is within 3m. And
please don’t put any metal object or
any obstacle between the path of the
mobile phone and the unit.
 PAIRING
1) In any mode, press and hold
PAIR(MODE) button (1) on the front
panel, “PAIRING” will appear on the
LCD.
2) On the mobile phone, select the
3) Bluetooth set up. (Please refer to the
instruction manual of your mobile
phone on how to operate Bluetooth.)
4) “CARBT” should appear in the list on
your mobile phone, please select
“CARBT” and then input password
“0000” .
5) When successful paired, “CONN
OK!” will be displayed on LCD.
6) When pairing failed, “PAIR END” will
be displayed on LCD. You can press
and hold PAIR button (1) to try the
pairing again.
7) Note: