EasyManua.ls Logo

Desoutter CVI3 - Socket Tray Setup and Usage; STATEMENT OF USE; ON RECEIVING THE SOCKET TRAY; TABLE MOUNTING

Desoutter CVI3
72 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
11/20164 / 72
6159931430
Issue no: 05
Series: -
Original instructions
© Copyright 2016, Ets Georges Renault
44818 St Herblain, FR
All rights reserved. Any unauthorized use
or copying of the contents or part thereof
is prohibited. This applies in particular to
trademarks, model denominations, part numbers
and drawings. Use only authorized parts. Any
damage or malfunction caused by the use of
unauthorised parts is not covered by Warranty or
Product Liability.
STATEMENT OF USE
This socket tray is designed for up to 4 different
sockets and is to be connected to the eBUS port
of the Desoutter CVI3 range of controllers.
No other use will be permitted.
For professional use only.
ON RECEIVING THE SOCKET TRAY
Check the following items are included in the
packing box:
2
3
4
1
Legend
1 Termination plug SubD 9-pt P/N 6159176250
2 Socket tray
3 4 screws M5x20
4 4 washers
OPTIONAL ACCESSORIES
Description Part number
Tubes and pawns kit 6153980355
eBus cable 1 m 6159176210
eBus cable 3 m 6159176220
eBus cable 5 m 6159176230
eBus cable 15 m 6159176240
Bit module for screwdriver bits 6153980835
OVERALL DIMENSIONS IN MM
139
219
139.80
TABLE MOUNTING
Secure the socket tray on the table by using
M6 screws.

Other manuals for Desoutter CVI3

Related product manuals