To Next PageTo Next Page
Need help?Do you have a question about the Desoutter CVI3 Series and is the answer not in the manual?
General| Power Supply | 24 V DC |
|---|---|
| Display | LCD |
| Inputs/Outputs | Digital and Analog I/O |
| Series | CVI3 |
| Communication Interface | Ethernet, Serial |
| Operating Temperature | 0°C to 45°C |
| Storage Temperature | -20°C to +70°C |
| Communication Protocols | Ethernet |
Overview of CVI3 controller models, power cords, compatible tools, optional accessories, and eSTOP controllers.
Details on ePOD models, their features, and capabilities for configuration backup and storage.
Ensuring correct line voltage and proper earthing of the controller before installation.
Mandatory safety warnings and instructions to be read and understood before proceeding with installation.
Steps for installing controllers, along with essential technical specifications.
Recommended installation sequence and mounting procedures for controllers.
Instructions for connecting cord tools to the CVI3 controller.
Procedure for connecting cordless tools to the CVI3 Vision controller via Wi-Fi.
Details on installing various eBUS accessories like socket trays, bit trays, and stacklights.
Procedure for installing and connecting an ePOD to the controller.
Procedures for installing Fieldbus modules and connecting external peripherals.
Connecting power, setting up networks, powering on/off, and configuring the system.
Computer requirements, operating systems, and software location for installation.
Steps to download, unzip, and install the CVI CONFIG software for system configuration.
Procedure to test and validate the system by running a tightening process with connected tools.
Steps to update tool information and check the current status of connected tools.
Guide on how to create a parameter set (Pset) for a tightening process using CVI CONFIG.
