36 Network configuration
devolo dLAN 550 WiFi
The dLAN default password is Home-
PlugAV.
4.5.2 dLAN devices
Each connected dLAN device, regardless of whether it
is connected locally or remotely in the network, is dis-
played with its MAC address, name and type.
4.5.3 Add a dLAN device
You can add additional dLAN devices to your dLAN
network.
Via encryption button (with home icon)
First press the encryption button (for about 1 second)
on an adapter in your existing network and then,
within 2 minutes, press the option Start setup (for
about 1 second) on the new dLAN 550 WiFi.
Via security ID
To do so, enter the security ID for the respective dLAN
adapter in the Security ID field and confirm it with
Start setup.
Before the networking procedure,
note the security IDs of all dLAN
adapters. This unique identifier of
each dLAN device is located on the
label on the back of the housing. It
consists of 4 x 4 letters separated by
dashes (e.g. ANJR-KMOR-KSHT-
QRUV). Ensure that all dLAN adapters
are connected to the mains supply
and computers or other network
components as appropriate.
4.6 Management
In addition to the language selection, the
Management area includes configura-
tion options for the network, device secu-
rity and management, i.e. resetting,
securing and restoring your individual
configurations and updating firmware.
Click or tap the respective icon to go the corresponding
area.
4.6.1 Language selection
Select your desired menu language here. Save your en-
try with OK.
To Next Page
Loading...
Need help?
General
