Introduction 16
devolo Magic 1 WiFi
4Red and
white LED
Flashes at inter-
vals of 0.1 sec.
red/2 sec. white
Data transmission rate not in optimum range ** Can be disabled
5 White LED Status 1: Flas-
hes at intervals
of 0.5 sec.
Status 2: Flas-
hes at intervals
of
1 sec.
Status 1: This devolo Magic adapter is in pairing
mode and the system is searching for new
devolo Magic adapters.
Status 2: Someone has triggered the "Identify de-
vice" function on the web interface or in the devolo
app. This function identifies the devolo Magic ad-
apter being sought.
Cannot be disabled
6 White LED Lights up steady The devolo Magic connection does not have any is-
sues and the devolo Magic adapter is ready to ope-
rate.
Can be disabled
7 White LED Flashes at inter-
vals of
0.1 sec. on /
5sec.off
The devolo Magic adapter is in standby mode.*** Can be disabled
8Red and
white LED
Flashes at inter-
vals of 0.5 sec.
red/0.5 sec.
white
The devolo Magic adapter is carrying out a firm-
ware update.
Cannot be disabled
LED Flashing be-
haviour
Meaning LED status display
(web interface*)
To Next Page
Loading...
