EasyManuals Logo

Devolo Magic 2 WiFi next User Manual

Devolo Magic 2 WiFi next
55 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #47 background imageLoading...
Page #47 background image
47 Network configuration
devolo Magic 2 WiFi next
disable the Enable PLC button or Enable Wi-Fi
button option.
The operating buttons are enabled in the
devolo Magic 2 WiFi next factory default settings.
Under Time zone, you can select the current time
zone, e.g. Europe/Berlin. The Time server (NTP)
option lets you specify a time server. A time server
is a server on the Internet whose task consists of
providing the exact time. Most time servers are
coupled with a radio clock. Select your time zone
and time server; the devolo Magic 2 WiFi next au-
tomatically switches between standard time and
summer time.
4.7.3Configuration
Saving the device configuration
To save the enabled configuration to your compu-
ter as a file, select the corresponding button in the
System Configuration Save Configuration
to File area. The system starts downloading the
current device configuration.
Restoring the device configuration
An existing configuration file can be sent to the
devolo Magic 2 WiFi next in the System Confi-
guration area and enabled there. Select a suitable
file via the Select file ... button and start the opera-
tion by clicking the Restore button.
Factory Settings
The devolo Magic 2 WiFi next is reset to the origi-
nal factory defaults in the System Configurati-
on area with the Factory Reset option.
Doing so causes you to lose your personal Wi-Fi
and PLC settings. The last-assigned passwords
for the devolo Magic 2 WiFi next are also reset.
For backup purposes, all active configuration set-
tings can be transmitted to your computer, stored
there as a file and reloaded into the
devolo Magic 2 WiFi next. This function can be
useful for creating a variety of configurations that
will let you quickly and easily set up the device for
use in different network environments.
Reboot device
In order to reboot the devolo Magic 2 WiFi next,
select the Reboot button in the System Confi-
guration area.
4.7.4Firmware
The firmware of the devolo Magic 2 WiFi next in-
cludes the software for operating the device. If
necessary, devolo offers new versions on the Inter-

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Devolo Magic 2 WiFi next and is the answer not in the manual?

Devolo Magic 2 WiFi next Specifications

General IconGeneral
MIMO typeMulti User MIMO
Power plug-
Ethernet LANYes
Damping filter2 - 86 MHz
Wi-Fi standards802.11a, 802.11b, 802.11g, Wi-Fi 4 (802.11n), Wi-Fi 5 (802.11ac)
Top Wi-Fi standardWi-Fi 5 (802.11ac)
Security algorithmsWPA, WPA2, WPA3-PSK, WPS-PBC, WPS-PIN
Networking standardsIEEE 802.11a, IEEE 802.11ac, IEEE 802.11b, IEEE 802.11g, IEEE 802.11k, IEEE 802.11n, IEEE 802.11r, IEEE 802.11v, IEEE 802.3, IEEE 802.3ab, IEEE 802.3az, IEEE 802.3u, IEEE 802.3x
Ethernet LAN data rates10, 100, 1000 Mbit/s
Ethernet LAN (RJ-45) ports2
Maximum data transfer rate2400 Mbit/s
Maximum operating distance500 m
Ethernet LAN interface typeGigabit Ethernet
Copper ethernet cabling technology10BASE-T, 100BASE-TX, 1000BASE-T
WLAN data transfer rates supported300, 867 Mbit/s
Mobile operating systems supportedAndroid, iOS
Cables includedLAN (RJ-45)
Quantity per pack1 pc(s)
Antenna typeInternal
CertificationWEEE
Product colorWhite
Country of originGermany
AC input voltage196 - 250 V
AC input frequency50 Hz
Power over Ethernet (PoE)No
Power consumption (standby)3.1 W
Power consumption (typical)8.9 W
Storage temperature (T-T)-25 - 70 °C
Operating temperature (T-T)0 - 40 °C
Operating relative humidity (H-H)10 - 90 %
Weight and Dimensions IconWeight and Dimensions
Depth40 mm
Width76 mm
Height152 mm
Package depth92 mm
Package width118 mm
Package height190 mm
Package weight570 g

Related product manuals