Single port KVM over IP switch
3.3 Connecting IP-KVM switch to the Multi-port KVM Switch system usage scenario
3.4 Connecting the External Reset/Power Option
Please refer to the manual of the IP-KVM 8/16/32 port external power switch option or a third
party external power option to connect those external devices to one of the serial interface on the
rear side of IP-KVM switch. By the date of printing this manual supported options are:
. Avocent.SPC1 800/1600
Sentry In-Line Power Module
Peppercon IPM-220L
To Next Page
Loading...
General