Single port KVM over IP switch
TABLE OF CONTENTS
1. THE QUICK INSTALLATION GUIDE
2. INTRODUCTION
2.1 When the sever is up and running
2.2 When the server is dead
2.3 Features
2.4 Package contents
2.5 Technical specifications
2.6 System requirement
2.7 Cable diagrams
3. HARDWARE INSTALLATION
3.1 Operation overview
3.2 Connecting IP- KVM to the host system
3.3 Connecting IP- KVM to multi-port KVM switch
3.4
Connecting External Reset/Power option
4. CONFIGURATION
4.1 Initial Configuration
4.1.1 Initial configuration via DHCP server
4.1.2 Initial configuration via serial console
4.1.3 Keyboard, Mouse and Video configuration
4.1.3.1 IP-KVM switch keyboard settings
4.1.3.2 Remote Mouse Settings
4.1.3.3
Auto mouse speed and mouse synchronization
4.1.3.4
Host system mouse settings
4.1.3.5
Single and Double Mouse Mode
4.1.3.6
Video Modes
5. USAGE
5.1 Prerequisites
5.2 Login into the IP-KVM switch and logout
5.2.1 Login into the IP-KVM switch
5.2.2 Logout from the IP-KVM switch
5.3 The Remote Console
5.4 Main Window
5.4.1 Remote Console Control Bar
5.4.2 Remote Console Status Line
5.5
To Next Page
Loading...
General