77
8514-300-001 REV PR
Figure 7-47 Top Level Cycles Menu
To reset all values in the Cycles option to factory default, press “Enter” when the “DEFAULT”
prompt is shown. Press “Enter” again when the “RESET” prompt is shown to confirm the action.
7.4.7 Plus Cycle Features
The “Plus Cycle” options allow for the user to prompt the customer for varying vend prices
based on additional wash baths chosen. In general, the user can program the additional wash
baths in a similar manner to what was described in the “Cycles” Options section.
To Next Page
Loading...
