DFI BT253 - Main and Advanced BIOS Settings

Chapter 3
www.df .com
28
Chapter 3 BIOS Setup
Main
The Main menu is the first screen that y ou will see when y ou enter the BIOS Setup Utilit y.
System Date
The date f ormat is <da y>, <month>, <date>, <y ear>. Day displays a da y, from Sun-
da
y to Saturda y. Month displa ys the month, from January to December . Date displa ys
the date, from 1 to 31. Y ear displays the y ear, from 1980 to 2099.
System Time
The time f ormat is <hour>, <minute>, <second>. The time is based on the 24-hour
military
-time clock. F or example, 1 p .m. is 13:00:00. Hour displa ys hours from 00 to
23. Minute displa ys minutes from 00 to 59. Second displa ys seconds from 00 to 59.
AMI BIOS Setup Utility Advanced
The Advanced menu allows y ou to configure y our system f or basic operation. Some entries are
defaults required by the system board, while others, if enabled, will impro ve the perf ormance
of your system or let y ou set some f eatures according to y our preference.
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Save & ExitChipset
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
 Select Screen
 Select Item
Enter: Select
+/
-:
Change Opt.
F1: General Help
F2: Previous Values
F4: Save & Reset
ESC: Exit
BIOS Information
BIOS Vendor
Project Version
Build Date and Time
CPU Confi guration
Microcode Patch
BayTrail SoC
System Date
System Time
Access Level
American Megatrends
BT253 0.11 x64
11/26/2014 10:05:50
902
Do Stepping
[Thu 08/01/2015]
[16:19:21]
Administraor
Advanced
Security Boot
Main
Important:
Setting incorrect field v alues may cause the system to malf unction.
Windows 8.X or Windows 7
Aptio Setup Utility - Copyright (C) 2013 American Megatrends, Inc.
Version 2.16.1242. Copyright (C) 2013 American Megatrends, Inc.
OS Selection [Windows 7]
SCC eMMC Support [Enable eMMC Support]

Trusted Computing

NCT6106D Super IO Confi guration

HW Monitor

CPU Confi guration

SATA Confi guration

Network Stack Confi guration

CSM Confi guration

USB Confi guration

Security Confi guration

Intel(R) I210 Gigabit Network Connection - 00:01:29:51......

Intel(R) I210 Gigabit Network Connection - 00:01:29:51......
Save & ExitChipset Security Boot
Main
Advanced
 Select Screen
 Select Item
Enter: Select
+/
-:
Change Opt.
F1: General Help
F2: Previous Values
F4: Save & Reset
ESC: Exit
Set the Date. Use Tab
to switch between Date
elements.
OS Selection
Select the OS support: Windows 8.X or Windows 7 .
SCC eMMC Support
Enable or disable the SCC eMMC support.