DFI BT551 - BIOS Audio and Miscellaneous Settings; Audio Configuration; Miscellaneous Configuration

Chapter 3
www.dfi .com
30
Chapter 3 BIOS Setup
Audio Configuration
This section is used to configure the audio settings.
Control Detection of the
Azalia device.
Disabled = Azalia will be
unconditionally disabled.
Enabled = Azalia will be
unconditionally enabled.
Auto = Azalia will be ena-
bled if present, disabled
otherwise.
Audio Confi guration
Audio Controller
Advanced
F1 Help ↑↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select

SubMenu F10 Save and Exit
InsydeH20 Setup Utility Rev. 5.0
<Enabled>
Audio Controller
Control the detection of the Azalia device.
Disabled
Azalia will be unconditionally disabled.
Enabled
Azalia will be unconditionally enabled.
Auto
Azalia will be enabled if present, disabled otherwise.
Miscellaneous Configuration
This section enables or disables Misc. features.
Specify what state to go to
when power is re-applied
after a power failure (G3
state).
State After G3
OS Selection
Advanced
F1 Help ↑↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select

SubMenu F10 Save and Exit
InsydeH20 Setup Utility Rev. 5.0
<S5 State>
<Windows>
State After G3
Specify what state to go when the power is reapplied after a power failure. (G3 state).
OS Selection
Select the OS support: Linux or Windows.