DFI BT551 - BIOS Boot Options; Boot Menu Type and Sequence

Chapter 3
www.dfi .com
36
Chapter 3 BIOS Setup
Boot
Select boot type to Dual
type, Legacy type or UEFI
type.
Boot Type
Network Stack
PXE Boot Capability
ACPI Selection
USB Boot
Boot Menu Type

Boot Sequence
Main
Advanced
F1 Help ↑↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select

SubMenu F10 Save and Exit
InsydeH20 Setup Utility
ExitSecurity Power Boot
Rev. 5.0
<Dual Boot Type>
<Disabled>
<Disabled>
<Acpi 5.0>
<Enabled>
<Advance>
Boot Type
Select the boot type. The options are Dual Boot Type, Legacy Boot Type or UEFI Boot
Type.
Network Stack
Network stack support:
Windows 8 BitLocker Unlock.
UEFI IPv4 PXE
Legacy PXE OpROM
ACPI Selection
Select the ACPI booting.
USB Boot
Enable or disable the booting for USB boot devices.
Boot Menu Type
Normal
Based on the boot normal priority, it determines the EFI device first or the legacy
device first.
Advance
All boot devices follow the user’s selection sequence.
Boot Sequence
This sequence is used when the system is powered up normally.
Boot Sequence
S10016
F1 Help ↑↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select

SubMenu F10 Save and Exit
InsydeH20 Setup Utility
Boot
Rev. 5.0