DFI BT551 - BIOS Hardware Monitor and Security; Hardware Monitor Status; Security Settings and TPM

Chapter 3
www.dfi .com
34
Chapter 3 BIOS Setup
Hardware Monitor
This field only displays the hardware monitor status.
Hardware Monitor
Voltage
VCORE
VDDQ
+12V
5V
Temperature
System (
o
C/
o
F)
CPU (
o
C/
o
F)
Fan Speed
SYS FAN
Advanced
F1 Help ↑↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select

SubMenu F10 Save and Exit
InsydeH20 Setup Utility Rev. 5.0
0.904 V
1.337 V
11.904 V
5.080 V
41
o
C/105
o
F
42
o
C/107
o
F
0 RPM
Select TPM Device to ini-
tialize
Select TPM Device
TPM 1.2 Status
TPM Operation
Supervisor Password
User Password
Set Supervisor Password
Set User Password
Main
Advanced
F1 Help ↑↓ Select Item F5/F6 Change Values F9 Setup Defaults
Esc Exit ←→ Select Menu Enter Select

SubMenu F10 Save and Exit
InsydeH20 Setup Utility
ExitSecurity Power Boot
Rev. 5.0
Security
Select TPM Device
Initialize the selected TPM device..
TPM Operation
Enable or disable the TPM function. This option will automatically return to
No-Operation.
Set Supervisor Password
Set the supervisor’s password and the length of the password must be greater than
one character.
<TPM 1.2>
Enable and Active
<No operation>
Not installed
Not installed