Dialab GmbH
Operator's Manual DIAcheck series Rev-4 Page 23
2.5 DISPLAY PROTECTION FOIL
Requirements:
Type: Touchseinsitive Protection foil, clean tissue wet and dry, Peel-off-
plate
Size: same as Display (4,3”)
Installation:
Ready to fix on display, as described in the Inlay
(clean display with clean tissues wet and dry and fix protection foil carefully)
2.6 EXTERNAL THERMAL PRINTER
Requirements:
Type: Serial RS232 Printer
Power: external supply, 24V 1.5A
Cable: 2 x Sub D9, female, straight, max length 3m
Interface: RS232, 9600 Baud, 8, 1, No
Installation:
The printer is ready to plug in. No settings are required.
Do not plug power supply of printer (24V) to DIAcheck series. It will destroy the
instrument! Double check before you plug-in.
2.7 EXTERNAL BARCODE SCANNER
Requirements:
Type: Serial handheld scanner
Power: 5V DC over cable, PIN-9
Cable: Included to scanner
Interface: RS232 9600 Baud, 8, 1, No
Setting: no handshake or protocol. Barcode must be finished with carriage
return.
Installation:
The scanner is ready to plug in. no settings are required.
To Next Page
Loading...