DIALAB DIAcheck C1 - 3. OPERATION OF THE DIACHECK SERIES; 3.1 HOMESCREEN

Dialab GmbH
Operator's Manual DIAcheck series Rev-4 Page 26
3. OPERATION OF THE DIACHECK SERIES
3.1 HOMESCREEN
After boot or home button following screen is displayed
FIGURE 8: HOMESCREEN DIACHECK SERIES C4
UI Element
Element Name
Use Function
(1)
Date & Time
Edit date
(2)
Current test
Change test
(3)
Stopwatch
Start/Reset stopwatch or countdown
(4)
Menu or Home
Open menu or return to main
(5)
Status Dot
Show device status/Open system information
(6)
Multistart
Activate all channels
(7)
Optic-Button
Channel-1 is idle. Touch to enter new PID and activate
Active
Channel is active. Touch or add reagent to start
Blinking orange
Ongoing measurement. Touch to stop measurement
Current result
Touch to enter new PID
Other functionality:
[LIS]
Visible, if connected with LIS
Green LED
System is ready for measurement
Red LED
Indicate system problems. No measurement is possible.
37.0°C
Temperature on reagent block.
Grayed buttons
Use function is not possible during measurement.
Reduced brightness Screensaver mode. Touch to reactivate.
Long touch
Repeat current function
Green
Yellow
Red
Green = Ready to measure, no problems
Yellow = Ready to measure, minor problems
Red = Not ready to measure, major problems